MCF5282UM Datasheet, PDF (201/766 Pages) Freescale Semiconductor, Inc – MCF5282 and MCF5216 ColdFire Microcontroller User s Manual

Interrupt Controller Modules
10.3.4 Interrupt Request Level Register (IRLRn)
This 7-bit register is updated each machine cycle and represents the current interrupt requests for each
interrupt level, where bit 7 corresponds to level 7, bit 6 to level 6, etc. This register output is combined
with similar outputs from INTC1 and eventually encoded into the 3-bit priority interrupt level driven to
the processor core.
7
Field
IRQ[7:1]
2
1
0
—
Reset
0000_0000
R/W
R
Address
IPSBAR + 0xC18, 0xD18
Figure 10-7. Interrupt Request Level Register (IRLRn)
Table 10-10. IRQn Field Descriptions
Bits Name
Description
7–1 IRQ Interrupt requests. Represents the prioritized active interrupts for each level.
0 There are no active interrupts at this level
1 There is an active interrupt at this level
0
— Reserved
10.3.5 Interrupt Acknowledge Level and Priority Register (IACKLPRn)
Each time an IACK is performed, the interrupt controller responds with the vector number of the highest
priority source within the level being acknowledged. In addition to providing the vector number directly
for the byte-sized IACK read, this 8-bit register is also loaded with information about the interrupt level
and priority being acknowledged. This register provides the association between the acknowledged
“physical” interrupt request number and the programmed interrupt level/priority. The contents of this
read-only register are described in Figure 10-8 and Table 10-11.
7
6
4
3
0
Field —
LEVEL
PRI
Reset
0000_0000
R/W
R
Address
IPSBAR + 0xC19, 0xD19
Figure 10-8. IACK Level and Priority Register (IACKLPRn)
Table 10-11. IACKLPRn Field Descriptions
Bits Name
7
— Reserved
Description
Freescale Semiconductor
MCF5282 and MCF5216 ColdFire Microcontroller User’s Manual, Rev. 3
10-11