|
S9S12C128F0MFUE Datasheet, PDF (18/690 Pages) Freescale Semiconductor, Inc – Reference Manual | |||
|
◁ |
Chapter 1 MC9S12C and MC9S12GC Device Overview (MC9S12C128)
⢠Memory options:
â 16K or 32Kbyte Flash EEPROM (erasable in 512-byte sectors)
64K, 96K, or 128Kbyte Flash EEPROM (erasable in 1024-byte sectors)
â 1K, 2K or 4K Byte RAM
⢠Analog-to-digital converters:
â One 8-channel module with 10-bit resolution
â External conversion trigger capability
⢠Available on MC9S12C Family:
â One 1M bit per second, CAN 2.0 A, B software compatible module
â Five receive and three transmit buffers
â Flexible identiï¬er ï¬lter programmable as 2 x 32 bit, 4 x 16 bit, or 8 x 8 bit
â Four separate interrupt channels for Rx, Tx, error, and wake-up
â Low-pass ï¬lter wake-up function
â Loop-back for self test operation
⢠Timer module (TIM):
â 8-channel timer
â Each channel conï¬gurable as either input capture or output compare
â Simple PWM mode
â Modulo reset of timer counter
â 16-bit pulse accumulator
â External event counting
â Gated time accumulation
⢠PWM module:
â Programmable period and duty cycle
â 8-bit 6-channel or 16-bit 3-channel
â Separate control for each pulse width and duty cycle
â Center-aligned or left-aligned outputs
â Programmable clock select logic with a wide range of frequencies
â Fast emergency shutdown input
⢠Serial interfaces:
â One asynchronous serial communications interface (SCI)
â One synchronous serial peripheral interface (SPI)
⢠CRG (clock reset generator module)
â Windowed COP watchdog
â Real time interrupt
â Clock monitor
â Pierce or low current Colpitts oscillator
â Phase-locked loop clock frequency multiplier
â Limp home mode in absence of external clock
â Low power 0.5MHz to 16MHz crystal oscillator reference clock
18
MC9S12C-Family / MC9S12GC-Family
Freescale Semiconductor
Rev 01.24
|
▷ |