FXLA2203 Datasheet, PDF (4/16 Pages) Fairchild Semiconductor – Dual-Mode, Dual-SIM-Card Level Translator

Absolute Maximum Ratings
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only.
Symbol
Parameter
Conditions
V_CC Supply Voltage
V_CC
VCC_H_n, VCCn
V_IN DC Input Voltage
V_O
Output Voltage⁽⁴⁾
Host Ports and Card Ports
Control Input (EN and CH_Swap)
Output 3-State
Output Active (Host Port)
Output Active (Card Port)
I_IK
I_OK
I_OH/I_OL
I_CC
T_STG
P_DISS
ESD
DC Input Diode Current
DC Output Diode Current
DC Output Source / Sink Current⁽⁴⁾
V_I<0V
V_O<0V
V_O>V_CC
DC V_CC or Ground Current (per Supply Pin)
Storage Temperature Range
Power Dissipation at 5MHz
Electrostatic
Discharge
Capability
Human Body Model,
JESD22-A114⁽⁵⁾
Charged Device Model,
JESD22-C101
Card Side Pins 3-5, 7-9, 14, 22-24
All Other Pins
Card Side Pins 3-5, 7-9, 14, 22-24
All Other Pins
Notes:
4. I_O absolute maximum ratings must be observed.
5. Human Body Model (HBM): R=1500Ω, C=100pF.
Min.
-0.5
-0.5
-0.5
-0.5
-0.5
-0.5
-0.5
-50
-65
Max.
5.0
4.6
4.6
5.0
4.6
V_CC +0.5
V_CC +0.5
-50
-50
+50
+50
±100
+150
0.57
9
3
2
2
Unit
V
V
V
V
mA
mA
mA
mA
°C
W
kV
Recommended Operating Conditions
The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended
operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not
recommend exceeding them or designing to Absolute Maximum Ratings.
Symbol
Parameter
Conditions
Min.
V_CC Power Supply⁽⁶⁾
V_CC
VCC_H_n, VCCn
1.65
1.65
V_IN
Input Voltage⁽⁷⁾
Host Port
0
Card Port
0
Host Port
0
V_OUT Output Voltage⁽⁷⁾
Card Port
0
Host Port I/O Pin
0
Card Port I/O Pin
0
T_A Operating Temperature, Free Air
-40
dt/dV Input Edge Rate
RST and CLK
Θ_JA Junction-to-Ambient Thermal Resistance
Notes:
6. V_CC must always be equal to, or greater than, V_CC1 and V_CC2.
7. All unused inputs and input/outputs must be held at their respective V_CC or GND.
Max.
4.35
3.60
3.6
3.6
3.6
3.6
VCC_H_n +0.3V
VCCn +0.3V
+85
10
52.1
Unit
V
V
V
V
V
V
V
V
°C
ns/V
C/W
© 2010 Fairchild Semiconductor Corporation
FXLA2203 • Rev. 1.0.5
4
www.fairchildsemi.com