XRT75VL00_08 Datasheet, PDF (17/50 Pages) Exar Corporation – E3/DS3/STS-1 LINE INTERFACE UNIT WITH JITTER ATTENUATOR

REV. 1.0.6
XRT75VL00
E3/DS3/STS-1 LINE INTERFACE UNIT WITH JITTER ATTENUATOR
1.0 ELECTRICAL CHARACTERISTICS
TABLE 1: ABSOLUTE MAXIMUM RATINGS
SYMBOL
V_DD
V_IN
I_IN
S_TEMP
A_TEMP
ThetaJA
ThetaJC
M_LEVL
ESD
PARAMETER
Supply Voltage
Input Voltage at any Pin
Input current at any pin
Storage Temperature
Ambient Operating Temperature
Thermal Resistance
Exposure to Moisture
ESD Rating
MIN
MAX
UNITS
COMMENTS
-0.5
6.0
V
Note 1
-0.5
5+0.5
V
Note 1
100
mA
Note 1
-65
150
0_C
Note 1
-40
85
0_{C linear airflow 0 ft./min}
20
0_{C/W linear air flow 0ft/min}
6
0_C/W
5
level
EIA/JEDEC
JESD22-A112-A
2000
V
Note 2
NOTES:
1. Exposure to or operating near the Min or Max values for extended period may cause permanent failure and impair
reliability of the device.
2. ESD testing method is per MIL-STD-883D,M-3015.7
TABLE 2: DC ELECTRICAL CHARACTERISTICS:
SYMBOL
PARAMETER
MIN.
TYP.
MAX.
UNITS
DV_DD Digital Supply Voltage
3.135
3.3
3.465
V
AV_DD Analog Supply Voltage
3.135
3.3
3.465
V
I_CC Supply current (Measured while transmitting and receiving all
65
120
175
mA
1’s)
P_DD Power Dissipation
210
395
610
mW
V_IL Input Low Voltage
0.8
V
V_IH Input High Voltage
2.0
5.0
V
V_OL Output Low Voltage, I_OUT = - 4mA
0.4
V
V_OH Output High Voltage, I_OUT = 4 mA
2.4
V
I_L
Input Leakage Current¹
±10
µA
C_I
Input Capacitance
10
pF
C_L Load Capacitance
10
pF
NOTES:
1. Not applicable for pins with pull-up or pull-down resistors.
2. The Digital inputs and outputs are TTL 5V compliant.
15