|
1-480318-0 Datasheet, PDF (75/98 Pages) List of Unclassifed Manufacturers – PLUG 2 CIRCUIT, COMMERCIAL MATE-N-LOK | |||
|
◁ |
Applicator Styles
Soft Shell
Pin and Socket Connectors
Application Tooling (Continued)
End- and Side-Feed Heavy-
Duty Miniature (HDM)
Applicators
Stripper-Crimper (SCA)
Applicators
I For use with AMP-O-MATIC
Stripper-Crimper Machines
I Terminate a wide variety of
open-barrel products
I Quickly interchangeable to
run different products
I Easily repaired
I Simple dial-in settings to
handle similar products and
various wire sizes
I CQM applicators are
available
Crimp Quality Monitor
(CQM) Applicators
AMP
I Handle a wide variety of
products
I Used with both semi- and
fully-automatic machines
I Quickly interchangeable to
run different products
I Easily repaired
I Simple dial-in settings to
handle similar products
and various wire sizes
I Same basic features as
regular HDM and SCA
applicators
I Recommended for use
with machines featuring
manual or automatic
precision-adjust
I Use two built-in sensors to
provide the Crimp Quality
Monitor with data to
measure crimp height,
and evaluate the quality of
each crimp
Applicator and Hand Tool
Selection Guide
Related Product Data
Contacts
2.5 mm Signal Double Lock (SDL)âpage 12
Micro MATE-N-LOK 3 mmâpage 22
Grace Inertia Connectors (GIC) 3.5âpage 50
.062 Commercial Pin and Socketâpage 55
Power Double Lock (PDL)âpage 61
Mini Universal MATE-N-LOKâpage 84
Mini Universal MATE-N-LOK 2âpages 100-101
(MR) Miniature Rectangularâpage 112
VAL-U-LOK Connector Systemâpage 120
AMP-DUACâpages 126-127
5.0 mm Power Key Connectors (PKC)âpage 137
.093 Commercial Pin and Socketâpage 145
Commercial MATE-N-LOKâpages 155-156
.140 MATE-N-LOKâpage 166
Universal MATE-N-LOKâpages 172-173
Universal MATE-N-LOK IIâpage 192
.156 MATE-N-LOKâpage 203
Density
Product Line
Applicators
A
B
C
Hand Tools
D
E
2.5 mm Signal Double Lock (SDL)
*
*
*
X
-
Micro MATE-N-LOK 3 mm
X
X
X
X
-
Grace Inertia Connectors (GIC) 3.5
*
*
*
X
-
.062 Commercial Pin and Socket
X
X
X
-
X
High
Power Double Lock (PDL)
Mini-Universal MATE-N-LOK
*
*
*
X
X
X
X
-
X
X
Sealed Mini-Universal MATE-N-LOK X
X
X
X
-
Mini-Universal MATE-N-LOK 2
X
X
X
X
X
(MR) Miniature Rectangular
X
X
X
X
-
VAL-U-LOK Connector System
X
-
-
-
X
AMP-DUAC
X
X
-
X
-
5.0 mm Power Key Connectors (PKC) *
*
*
X
-
.093 Commercial Pin and Socket
X
X
X
-
X
Standard Commercial MATE-N-LOK
.140 MATE-N-LOK
X
X
X
X
X
X
X
X
X
-
Universal MATE-N-LOK
X
X
X
X
X
Universal MATE-N-LOK II
X
X
X
X
X
.156 MATE-N-LOK
X
-
-
X
-
AâHeavy Duty Miniature (HDM) Applicators
BâStripper-Crimper Applicators (SCA)
CâCrimp Quality Monitor (CQM) Applicators
DâCERTI-CRIMP Hand Tool
EâPRO-CRIMPER III Commercial Hand Tool
* Contact the Tooling Assistance Center (TAC) at 1-800-722-1111 for Applicator Part Numbers.
Mechanical Hand Tools
CERTI-CRIMP II Straight
Action Hand Tools (SAHT)
91501-1, 91502-1
Premium grade hand tools.
Feature ratchet control to
provide complete crimp
cycle. Die sets close in a
straight line. Include a con-
tact locator and wire stop,
plus an insulation crimp
adjustment lever, when
applicable. Approximate
weight 1.3 lb [0.59 kg]
For more information, request
Catalog 65780.
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Note: This listing is for reference purposes only. To obtain part numbers for specific applications call Technical Support.
209
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
|
▷ |