1-480318-0 Datasheet, PDF (73/98 Pages) List of Unclassifed Manufacturers – PLUG 2 CIRCUIT, COMMERCIAL MATE-N-LOK

Soft Shell
Pin and Socket Connectors
AMP
Application Tooling
Semiautomatic Machines
AMP-O-LECTRIC Model “G”
Terminating Machines,
354500-1, -9, -11
AMP-O-MATIC
Stripper-Crimper Machine,
854040-3, -4
Semiautomatic bench machines
for crimping reeled terminals
and contacts, featuring a quiet
and reliable direct motor drive,
microprocessor controls for
ease of setup and operation,
and guarding and lighting
designed for operator conven-
ience and safety. All models
are equipped with either
manual or automatic precision
adjustment of crimp height.
Machine-mounted sensors are
available for crimp quality
monitoring using conventional
miniature-style applicators.
Specifications
Width—18.7-25.3 [475-643] depend-
ing on applicator type
Depth—21.5-28.1 [546-713] depend-
ing on applicator type
Height—20 [508]
Weight—240 lb [110 kg]
Electrical—120 or 220 VAC, 50 or 60 Hz
Air—90-110 psi [6.21-7.59 bar],
6 scfm [0.00282 m³/s] when required
with air-feed applicators
Wire Range—26-10 AWG [0.12-6
mm²] solid or stranded, depending on
product applied
For more information, request Catalog
65828, Catalog 82275 [Crimp
Quality Monitor (CQM)].
Semiautomatic bench crimping
machines that also strip the
wire, and are therefore used for
terminating jacketed cable.
Feature manual precision
adjustment of crimp height,
keyed strip blades for faster,
more accurate setups, and an
efficient scrap removal system.
All adjustments can be made
from the front of the machines
without special tools. Available
with crimp quality monitoring.
Specifications
Width—14 [355]
Depth—18 [457]
Height—33 [838] without reel
Weight—150 lb [68 kg]
Electrical—120 VAC, 50 or 60 Hz, .5 A
Air—80-100 psi [5.52-6.90 bar], 3.5
scfm [0.00165 m³/s]
Wire Range—32-14 AWG
[0.03-2 mm²]
For more information, request Catalog
65004.
AMP 3K/40 and AMP 5K/40
Terminators
As value oriented terminators,
the AMP 3K/40 and AMP 5K/40
are designed for customers
that require the increased
output and quality of a semi-
automatic machine at a com-
petitive price. By incorporating
the most commonly requested
features as standard and
offering a long list of optional
equipment, these terminators
offer flexibility to meet the
specific needs of various
applications at the lowest
possible cost.
Optional Stripping Module for the AMP 3K/40, AMP 5K/40
and AMP-O-LECTRIC Model G Terminators
The combination of the
Stripping Module with the
AMP-O-LECTRIC Model G
Terminator or the AMP 3K/40,
5K/40 provides an economical,
proficient method of stripping
wire and crimping terminals
on the same machine. Wires
are stripped moments before
crimping, meaning there is
virtually no chance of damag-
ing wire conductors during
handling or storage. Once the
wire is fed into the start sensor
the Stripping Module does the
rest, improving placement
accuracy.
For more information, request
Catalog 1309085.
Crimp Quality Monitor
This system measures the crimp
height of each termination as it
is made. It also evaluates the
quality of each crimp. If a crimp
is questionable, the monitor
alerts the operator with both
visual and audible alarms. It
also features ports for printing
and networking. For use with
AMP-O-LECTRIC Model “G”
and AMP-O-MATIC Stripper-
Crimper Machines, the monitor
is mounted to the machine. For
use with AMPOMATOR CLS IV+
Machines, it is integrated into
the machine’s operating system,
with the displays appearing on
the machine’s touch screen.
For more information, request Catalog
82275.
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Note: This listing is for reference purposes only. To obtain part numbers for specific applications call Technical Support.
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
207
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208