1-480318-0 Datasheet, PDF (17/98 Pages) List of Unclassifed Manufacturers – PLUG 2 CIRCUIT, COMMERCIAL MATE-N-LOK

Soft Shell
Pin and Socket Connectors
AMP
Commercial MATE-N-LOK Connectors
Product Facts
I Fully polarized nylon
housings
I Easy cavity identification
I Locking devices are integral
part of design. Connector
halves will hold together
under severe conditions of
vibration and shock
I Built-in contact stabilization
and self-aligning features
I Hot side egg-crate design
for safety
I Precision molded to exact-
ing tolerances
I Contacts accept a wire
size range of 30-14 AWG
[.05-2.0 mm²]
I Keying plug available
I “Clean” design contact —
no sharp projections to
impede insertion or damage
housings
I Low insertion/extraction
forces
I Contacts available in pre-tin
or gold over nickel plated to
fit the application require-
ments
I Wire-to-PC Board capability
using pin or socket headers
I Solderability—Headers meet
MIL-STD 202 method 208
I Four circuit PC Board-to-PC
Board capability available
by mating vertical socket
header with either vertical,
right-angle or surface mount
pin header
I Four circuit insulation dis-
placement connector (IDC)
available
I Ultraviolet (UV) stable
housings available in 1, 2
and 3 circuit
I Not for interrupting current
I Recognized under the
Component
Program of ^R
Underwriters Laboratories
Inc., File No. E28476
I Certified by
Canadian Standards
Association,
R
File No. LR 7189A
Performance Characteristics
The Commercial MATE-N-LOK
Connector performance characteristics
found on pages 151-152 are based on
free-hanging and panel mount connec-
tors, loaded with contacts crimped on
stranded wire.
Dielectric Withstanding Voltage—
1.5 KVAC between adjacent circuits
Insulation Resistance—
500 megohms minimum initial between
adjacent circuits
Voltage Rating—250 V AC or DC
Connector Mating—
4 lb. max. per circuit
Connector Unmating—
0.7 lb. min. per circuit
Contact Retention—15 lb. min.
per contact
Durability—50 cycles, mating and
unmating
Technical Documents
Product Specifications
108-1000 Commercial MATE-N-LOK
Connectors
108-1077 Commercial MATE-N-LOK
PC Board Headers
108-49000 IDC Connectors
Application Specifications
114-1012 Commercial MATE-N-LOK
Contacts
114-49001 IDC Connectors
Instruction Sheets
408-7209, 408-7166, 408-7200,
408-7201, 408-7215, 408-3186,
408-7300
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
151
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208