1-480318-0 Datasheet, PDF (39/98 Pages) List of Unclassifed Manufacturers – PLUG 2 CIRCUIT, COMMERCIAL MATE-N-LOK

Soft Shell
Pin and Socket Connectors
AMP
Universal MATE-N-LOK Connectors (Continued)
Contacts
Split pin diameter .086 [2.18]
Stock thickness .012 [.305]
These contacts can be used in either
Universal MATE-N-LOK Plug or Cap
housings only.
Related Product Data
Product Specification
108-1031 Universal MATE-N-LOK
Connectors
Application Specification
114-1010 Universal MATE-N-LOK
Contacts
Performance Characteristics—
pages 169-170
Technical Documents— pages 169
and 205-206
Application Tooling— pages 207-210
Housings—page 174
Split Pins
Wire Size Range Ins. Dia.
AWG [mm²]
Range
24-18
[.2-.8]
.040-.100
1.02-2.54
20-14
[.5-2.0]
20-14
[.5-2.0]
or
2@18 [.8]
.060-.130
1.52-3.30
.130-.200
3.30-5.08
L
Dim.
.790
20.06
.790
20.06
.810
20.57
Material & Finish
Brass, Pre-tin
Brass, Gold¹
Brass, Select Gold²
Brass, Pre-tin
Brass, Gold¹
Brass, Select Gold²
Brass, Pre-tin
Brass, Gold¹
Brass, Select Gold²
Contact Part Number
Strip Form Loose Piece
HDM
Applicator
Part No.
Hand Tool
Part No.
350699-1
350699-2
350699-7
350706-1
350706-2
350706-7
466320-1³
466320-2³
466320-4³
91510-1
350687-1
350687-2
350687-7
350705-1
350705-2
350705-7
687763-1³
687763-2³
687763-6³
91500-1
350700-1
350700-2
350700-7
350707-1
350707-2
350707-7
687926-1³
687926-2^{3 91508-14}
687926-6^{3 91506-14}
1_{Gold Finish — Plated with .000030 [.000762] min. gold in mating area and inside wire barrel over .000050 [.00127]}
min. nickel underplate on entire contact.
2_{Select Gold Finish — Plated with .000030 [.000762] min. gold in mating area over .000050 [.00127] min. nickel}
underplate on entire contact.
3_{HDM Applicator part number ending in -1, is used on AMPOMATOR CLS Machine with T or G Terminators, -2 is}
used on AMP-O-LECTRIC Model K Machine, -4 & -6 are used on AMP-O-LECTRIC Model G Machine. See
pages 207-210 for further information.
4_{Hand Tool No. 91508-1 for wire size 20-18 AWG. Hand Tool No. 91506-1 for wire size 16-14 AWG.}
Notes:
1. Split pins recommended for use in housings having 6, 9, 12 and 15 circuits to reduce mating force.
2. Phosphor bronze material contacts are available for use in high temperature/humidity cycling applications,
consult Tyco Electronics.
Grounding Pins
(.100 [2.54] longer than standard pin)
(Mate first, break last, not for interrupting
current)
Wire Size Range Ins. Dia.
AWG [mm²]
Range
24-18
[.2-.8]
.060-.130
1.52-3.30
20-14
[.5-2.0]
.060-.130
1.52-3.30
12-10
[3.0-5.0]
.200 max.¹
5.08
L
Dim.
.890
22.60
.890
22.60
.910
23.11
Material & Finish
Brass, Pre-tin
Brass, Pre-tin
Phos. Brz., Pre-tin
Contact Part Number
Strip Form Loose Piece
HDM
Applicator
Part No.
Hand Tool
Part No.
770210-1
—
567216-2²
567216-3²
—
350654-1
687763-1²
350669-1 687763-2² 91500-1
687763-6²
770234-3
466597-1²
—
466597-2² —
466597-3²
1_{There is no insulation barrel on this contact. Insulation maximum diameter is limited by the housing.}
2_{HDM Applicator part number ending in -1 is used on AMPOMATOR CLS Machine with T or G Terminators, -2 is}
used on AMP-O-LECTRIC Model K Machine, -3 & -6 are used on AMP-O-LECTRIC Model G Machine. See pages
207-210 for further information.
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Programmable Connector
Contact
(Socket with 110 Series Special
FASTON Tab)
Material and Finish
Brass, pre-tin
Note: All part numbers are RoHS Compliant.
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
.048
[1.22] ^Dia.
.805
[20.45]
Part Number
350877-1
Note: This contact will accept a 110
Series FASTON Receptacle — Part
No. 350871-1 (strip form) allowing
simple field wiring or wiring changes.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
173
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208