1-480318-0 Datasheet, PDF (35/98 Pages) List of Unclassifed Manufacturers – PLUG 2 CIRCUIT, COMMERCIAL MATE-N-LOK

Soft Shell
Pin and Socket Connectors
Universal MATE-N-LOK Connectors
Product Facts
I Pins and sockets can be
intermixed in the same
housing
I Positive polarization
I Rear cavity identification
I Contacts completely
enclosed in housings
I Positive locking housings
I Insulation capability to .200
[5.08] diameter
I Removable, crimp snap-in
contacts
I Low contact mating force
I Contacts accept 30-10 AWG
[.05-5.0 mm²] wire sizes
I Contacts available with pre-
tin or gold plating
I Dual locking lances provide
optimum contact stability
I Panel mount or free-hanging
I Mate with Universal
MATE-N-LOK II Housings
I Available in UL 94V-O flame
retardant material. Meets
the material requirements of
table 25.1 of U.L. Standard
1410 (television receivers
and video products)
I Not for interrupting current
I Harness to PC Board capa-
bility using pin or socket
headers
I Pin and socket headers are
available in both vertical and
right-angle style
I Solderability — headers meet
MIL-STD 202 Method 208
I Contacts are on .250 [6.35]
centerline spacing
I Recognized under the
Component
Program of ^R
Underwriters Laboratories
Inc., File No. E28476
I Certified by Canadian
R
Standards Association,
File No. LR 7189
I Passed test by VDE under
their Registration Number
3980/Continuous
Surveillance
Performance Characteristics
The Universal MATE-N-LOK Connector
performance characteristics found on
pages 169-170 are based on free-hanging
and panel mount connectors, loaded
with contacts crimped on stranded wire.
Dielectric Withstanding Voltage—
5.0 KVAC or 5.0 KVDC between
adjacent circuits
Insulation Resistance—
1000 megohms minimum initial between
adjacent circuits
Voltage Rating—600 V AC or DC
Contact Insertion Force—
5.0 lb. max. per contact
Contact Retention—15 lb. min.
per contact
Durability—50 cycles, mating and
unmating
Technical Documents
Product Specifications
108-1031 Universal MATE-N-LOK
Connectors
108-1053 Universal MATE-N-LOK
PC Board Headers
Application Specification
114-1010 Universal MATE-N-LOK
Contacts
Instruction Sheet
408-7714 Plug, Cap, Headers, Pin,
Socket and Accessories
AMP
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
169
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208