W58-124-9019910 Datasheet, PDF (6/28 Pages) ITT Industries – QT-BNC Connector To Tooling Cross Reference

Cannon 75 Ohm Connectors
Type 43 (SMZ)
Specifications
ELECTRICAL
Impedance 75 nominal
Frequency Range 0 to 3.0 GHz (some styles limited to 1.0GHz)
Working Voltage (dc or ac peak) At sea level, inner conductor to shell = 500 V
Proof Voltage (dc or ac peak) At sea level = 1500V
Insulation Resistance 5 G minimum
Contact Resistance* Center contact: 5.0m maximum. Outer contact: 1.0m maximum
Reflection Coefficient Refer to CECC122300
Current Rating 1.5 A dc maximum
MECHANICAL
Engagement Forces All snap-on, Screw-Lock & Posi-Lock styles except U Links = 60 N (13.5 lbs.) maximum
U Links (reduced force snap-on) = 40 N (9 lbs.) maximum
Separation Forces All snap-on, Screw-Lock & Posi-Lock styles except U Links = 60 N (13.5 lbs.) max,
8 N (1.8 lbs.) min.
U Links (reduced force snap-on) = 40 N (9 lbs.) maximum, 20 N (4.5 lbs.) minimum
SMZ
Posi-Lock Latch withstand Pull 220 N (50 lbs.)
Contact and Insulator Retention 21 N (4.7 lbs.)
Materials
Body components: Copper or zinc alloy. Center contacts (male/female): Copper alloy.
Insulators: PTFE or thermoset plastic. Crimp ferrules: Annealed copper alloy
Finish/Plating Center contacts: Gold. Outer contacts: Gold. Other metal parts: Nickel, tin or zinc
ENVIRONMENTAL
Vibration Severity
Shock Severity
(a) Frequency range: 10 Hz to 500 Hz. (b) Displacement**: 0,75 (.029). (c) Acceleration**:
98 m/s²(321 ft./s²). (d) Duration: 6 hours. ** Cross over at approx. 60 Hz
490 m/s² for 11 ms
Impact Severity (free specimens only) 5 impacts at 1m
Climatic Catagory 40/100/21
Bump 4000 total at 390 m/s ²
Free Fall (U Link only) BS2011: Part 2.1 Ed. Procedure 2. Severity: 50 falls
GENERAL
Connector Durability 250 matings minimum
*Except U Link connectors. See BS9210 F0022 for details.
NOTES
1) _{Values in this specification are typical for this range. Specific connectors may vary.}
2) _{Cannon 75 ohm coaxial connnectors are designed to meet or exceed the requirements of BS9210F0022 where applicable. This}
specification may be superseded by CECC122 300 and the details listed above are subject to change without notice to comply
with changes in these specifications.
Mating Interfaces
P_JAL_CU_KG
SOC_PK_LE_UGT
Please note that the description of the 2 halves follow the UK telecom format. In other regions a plug may be called a
jack, and a socket may be called a plug. Please take care when choosing your connectors.
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
www.ittcannon.com
6