W58-124-9019910 Datasheet, PDF (22/28 Pages) ITT Industries – QT-BNC Connector To Tooling Cross Reference

Cannon 75 Ohm Connectors
Tooling
Ferrule Crimp tools
T1025
Crimp tool frame only
Ferrule Crimp Tool Die Sets for T1025
T1025/5
T1025/8
T1025/9
Hex Die 4.52mm (.178) A/F
Hex Die 6.81mm (.268) A/F
Hex Die 3.84mm (.151) A/F
T1025/10
Hex Die 5.41mm (.213) A/F
T1025/36
Hex Die 4.3mm (.169) A/F
K26293
3 Way Hex Die, 2.67mm (.105),3.25mm
(.128),4.52mm (.178) A/F
Note; Contact Customer Service for availability on other
die sets
Ferrule Crimp Tool
050-000-0020210
Crimp tool frame only
Ferrule Crimp Tool Die Sets for 050-000-0020210
050-000-0020010
Die set 3.25mm (.128) and 5.41mm (.213) A/F
050-000-0020011
Die set 3.84mm (.151) and 5.18mm (.204) A/F
050-000-0020012
Die set 4.52mm (.178) and 6.48mm (.255) A/F
Note; Contact Customer Service for availability on other
die sets
Center Contact Crimp Tools
050-000-0030070
T4519
12 point center pin indent AFMSP-76
8 point center pin indent crimp tool MH800 GB109
Center Contact Crimp Tool without Positioner
995-0001-584
8 point center pin indent crimp tool M22520/2-01
Center Contact Positioner for 995-0001-584
T4831
T4868
T4852
Positioner for 1.6/5.6 contacts
Positioner for BNC contacts
Positioner for 1.0/2.3 contacts
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
www.ittcannon.com
22