W58-124-9019910 Datasheet, PDF (23/28 Pages) ITT Industries – QT-BNC Connector To Tooling Cross Reference

Tooling
Cannon 75 Ohm Connectors
Insertion / Extraction Tools for 1.0/2.3 and Type 54 Connectors
T4839
T4889
T4902
Straight tool, length 190mm (7.48) (figure A)
Straight and Right Angle Tool, length 190mm (7.48) (figure B)
Straight and Right Angle Tool, length 430mm (16.9) (figure B)
DDF Plug Extraction Tools
T4653
T4825
Type 43 Extractor Tool 65A
HDC43 Extractor Tool
Fig A
Fig B
Balun Termination Tools
T4836
T4837
Type 43 Plug Balun, 1.0/2.3 Plug Balun
HDC 43 Plug Balun
Lock Nut Assembly Tools
T4882
T4840
To be used with 1.0/2.3 connectors
To be used with 1.6/5.6 connectors
QT-BNC Crimp Tools
050-000-0030210
050-000-0030120
050-000-0030150
QT-BNC Dual Action Crimp Frame Only
QT-BNC Dual Action Crimp Tool Frame w/ .178 hex die
QT-BNC Dual Action Crimp Tool Frame w/.255 hex die
QT-BNC Die Sets
050-000-0030122
050-000-0030152
.178 Hex Die for QT-BNC
.255 hex die for QT-BNC
QT-BNC Complete Crimp Tool Kit (with case)
050-000-003200S
Contents include; carry case, 734 & 735 die sets, crimp tool
frame, hand held coax stripper and spare pockets for
QT-BNC connectors
Calibration Tools (go/no go gauge) for QT-BNC Die Sets
050-000-0030023
050-000-0030043
.178 hex
.255 hex
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
www.ittcannon.com
23