W58-124-9019910 Datasheet, PDF (17/28 Pages) ITT Industries – QT-BNC Connector To Tooling Cross Reference

QT-BNC
Cannon 75 Ohm Connectors
This innovative termination technique provides the QT-BNC with
a high pressure, gas tight center conductor joint of exceptional
mechanical integrity, without crimping the center contact. The
QT-BNC is a 75 ohm pre-assembled connector with an integral
central contact and rear crimp ferrule. This connector may be
terminated onto cable in under 20 seconds, significantly
reducing installation costs.
Applications
• Central Office Switching • Cross Connect Equipment • Telecommunications
Features and Benefits
Designed to simplify field installa-
tions with less piece parts
Plastic rear cap is color coded for
easy identification of cable type
Optional right angle strain relief
boot accessory (show above)
Compatible with select competitive
crimp tools and die sets
Telcordia Audited and Approved
3:1 reduction in assembly time
than conventional 3 piece crimp
BNC plugs
Specifications
Bump
Cable Retention
Connector Durability
Contact Current Rating
Contact/Insulator Retention
Contact Resistance
Corona Level
Coupling Mechanism Retention
DWV
Frequency Range
Impedance
Insertion Force
Insertion Loss
Insulation Resistance
Operating Temperature
Operating Voltage
RF Leakage
Shock
Termination Resistance (QT Center contact)
Vibration
VSWR
RoHS Compliant Part Numbers
4000 total at 390 m/s²
Cable
Axial Force
Torque
M17/29-RG59/
133 N (30 lbs) min.
0,9 Nm (8.0 in. lbs)
734 type
311 N (70 lbs) min.
0,9 Nm (8.0 in. lbs)
735A type
111 N (25 lbs) min.
0,45 Nm (4.0 in. lbs)
BT3002
111 N (25 lbs) min.
0,45 Nm (4.0 in. lbs)
500 mating cycles min.
1.5 A dc max.
22,3 N (5 lbs) min. axial force
Outer contact: 1.0 mΩ max.; Braid to body: 1.0 mΩ max.
375 V ac rms min. at 21 km (70,000 ft)
445 N (100 lbs) min.
1500 V ac rms at sea level
DC to 2.0 GHz
75Ω nominal
22,3 N (5 lbs) max.
0.2 dB max. at 2 GHz
5000 MΩ min.
–40°C to 85°C (–40°F to 185°F)
500 V ac rms at sea level
–60 dB typical up to 2 GHz
490 m/s² for 11 ms
3 mΩ max. (excluding pole resistance)
(a) Frequency range from 10 Hz to 500 Hz. (b) Displacement: 0.75 (.029),
(c) Acceleration: 98 m/s²,.(d) Duration: 6 hours.
1.2 max. (DC to 1 GHz); 1.3 max. (1 to 2 GHz)
Description
Connector Body
Insulators
Center Contact Male
Coupling Nut
Crimp Ferrule
Spring
Material
Phosphor bronze
Polymers rated to UL 94V-0
Beryllium copper
Die Cast, Copper Zinc Alloy
Annealed Copper Alloy
Stainless Steel
Finish
3.5 µM (140 µ in.) Nickel
—
1.27 µM (50 µ in.) Gold
2.0 µM (80 µ in.) Nickel
3.8 µM (150 µ in.) Nickel
—
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
www.ittcannon.com
17