W58-124-9019910 Datasheet, PDF (16/28 Pages) ITT Industries – QT-BNC Connector To Tooling Cross Reference

Cannon 75 Ohm Connectors
Telecom Baluns
ITT’s telecom baluns, for use in ITU G.703 applications, converts
between a 120 ohm twisted pair and a 75 ohm coaxial
transmission line.
These balun connectors have the transformer built into the body,
and can be quickly connected to screened or unscreened twisted
pair cables through IDC terminations, using a simple assembly
tool. The small size allows these connectors to be mounted on a
pitch of 10mm.
The balun is ideal for use where it is necessary to interconnect
equipment with 75 ohm coaxial outputs to a 120 ohm cable
distribution system. The balun is only a little larger than the
connector that it would replace.
Features and Benefits
IDC termination
Small size
Quick and simple termination
procedure
Meets G.703 standards
Specifications
Nominal Impedance
Frequency Range
Return loss 75 ohm and 120 ohm
Wire Size
Balun
Part Number
051-127-9989A9G
Type 43 (SMZ) Plug Balun
Coaxial 75 ohm
Twisted pair 120 ohm
50 kHz - 10 MHz
51 - 102 kHz
102 - 2048 kHz
2048 - 3072 kHz
3072 - 10000 kHz
>18dB
>25dB
>23dB
>16dB
Conductor 0.5mm copper
Insulation 1.4mm
051-127-9999A9G
HDC 43 (SMZ) Plug Balun
RoHS 5 Compliant
CIRCUIT DIAGRAM
75 OHM COAX.
~43.00
(1.693)
21.09
16,51
(0.830)
(0.650)
21,09
(0.830)
43,00
1.693
16,51
(0.650)
120 OHM TWISTED PAIR.
29,75
(1.171)
29,75
(1.171)
055-F24-9019A9G
1.0/2.3 Push-Pull Plug Balun
43,00
1.693
21,09
16,51
31,21
(0.830)
(0.650)
(1.229)
Assembly Instructions: BBAI 1240
Contact Customer Service if the style you require is not listed.
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
www.ittcannon.com
16