W58-124-9019910 Datasheet, PDF (20/28 Pages) ITT Industries – QT-BNC Connector To Tooling Cross Reference

Cannon 75 Ohm Connectors
DIN1.6/5.6
ELECTRICAL
Impedance
Frequency Range
Voltage Rating*
Insulation Resistance
Contact Resistance
Reflection Coefficient*
75 nominal
0-1 GHz
At sea level =330 Vrms
10G minimum
Inner contact = 4 m maximum
Outer contact: 2 m maximum
With f = 0.1 GHz
= 0.02 maximum
With f = 0.1-0.5 GHz
= 0.04 maximum
With f = 0.5-1.0 GHz
= 0.10 maximum
MECHANICAL
Withdrawal force inner female contact 0.5N (0.11 lbs) minimum
Withdrawal force inner male contact
Insertion force between jacks and plugs
Withdrawal force between jacks and plugs
1.7N (0.38 lbs) minimum
Screw types: 12N (2.7 lbs) maximum. Push-pull type: 20N (4.5 lbs) maximum
Screw types: 22N (4.9 lbs) minimum. Push-pull type: 20N (4.5 lbs) maximum
Materials
Body and nuts: Brass. Inner male contact: Brass
Inner ferrule contact and outer male contact: Beryllium copper. Insulators: PTFE
Crimp ferrules: Annealed copper alloy.
Finish/Plating Contact surfaces: Gold over nickel. Female bodies: Gold over nickel.
Male bodies: Nickel or silver. Nuts and crimp ferrules: Nickel
ENVIRONMENTAL
Temperature
GENERAL
Connector Durability
Standards
-40˚C to 85˚C
500 matings minimum
CECC 22240, DIN 47295, IEC 169-13
*Guideline value only - will depend on cable and connector types
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
www.ittcannon.com
20