TCS37717FN Datasheet, PDF (40/48 Pages) List of Unclassifed Manufacturers – The benefits and features of the TCS3771 are listed below

Figure 48:
Package FN Carrier Tape
TCS3771 − Packaging Mechanical Data
Note(s) and/or Footnote(s):
1. All linear dimensions are in millimeters. Dimension tolerance is ±0.10mm unless otherwise noted.
2. The dimensions on this drawing are for illustrative purposes only. Dimensions of an actual carrier may vary slightly.
3. Symbols on drawing A_o, B_o, and K_o are defined in ANSI EIA Standard 481-B 2001.
4. Each reel is 178 millimeters in diameter and contains 3500 parts.
5. ams packaging tape and reel conform to the requirements of EIA Standard 481-B.
6. In accordance with EIA standard, device pin 1 is located next to the sprocket holes in the tape.
7. This drawing is subject to change without notice.
Page 40
Document Feedback
ams Datasheet, Confidential
[v1-20] 2014-Aug-06