JBXFD1G05MCSDSMR Datasheet, PDF (36/44 Pages) List of Unclassifed Manufacturers – Sealed and Unsealed Push-Pull Connectors

JBX Sealed Series
Push-Pull Connectors
Technical characteristics
The technical characteristics are the same as for the standard JBX series except the following ones:
Material - Specific additional elements
Component
Seals
Protective boot
Material
Nitril & Silicon rubber
Elastolan (UPR)
Color
O’ring = black
Plug seal = black
Black
Working temperatures
-40° C; +250° C
- 58° F; + 482 ° F
-40° C; +80° C
- 40° F; + 176 ° F
Mechanical and climatics - Specific additional elements
Characteristics
Values
Protection Index
IP 67 (splashproof - 1/2 hour under 1 m of water)
Operating temperatures
-40° C; +80° C
- 40° F; + 176 ° F
Options
Receptacle Cap: maintain IP67 rating
Size 1 Part-number = JBX BR2022
Size 2 Part-number = JBX BR1015
Wiring and assembly instructions
Panel cutout
The panel cutout is the same as for the JBX size 2 shells except for the HC (or HCE) type for which it corresponds
to the JBX size 3 shells.
Range of cable diameter: from 6 to 9 mm
Operation to add during the plug assembly:
Deposit of watertight thread glue between the backnut  on the drawing p215) and the connection shell  on the
drawing p215).
Advised glue = Loctite 542.
36