JBXFD1G05MCSDSMR Datasheet, PDF (31/44 Pages) List of Unclassifed Manufacturers – Sealed and Unsealed Push-Pull Connectors

JBX Sealed Series
Push-Pull Connectors
Major features & benefits
Key features
• Sealed IP 67 (mated connectors) (FE, EC, SE & PE)
• Watertight receptacles IP68 (HC, HG, HH & HM)
• Mechanically keyed : ensure correct polarisation
and alignment.
• Contact arrangements : from 2 to 19 contacts.
• Wire gauge range from 26 AWG to 12 AWG.
• High contact density in a small space.
• Contact termination in either crimp, solder or
PCB contacts.
User advantages
Wet environment
Splash proof IP 67
6-collet cluster
Removable contacts
Allows a wide range of cable diameter Crimp versions allow easier
applications for a single connector.
wiring and maintenance.
Part number system
Basic series
Shell type-Receptacle
Shell type - Plug
Shell size
Keying
Contact layout
Contact type
Contact termination
Surface plating
Obligatory Suffix
Contact Size
Cable Backnut Option
Key Identifier
EC - HC - HG - HH - HM - PE - SE
FE
JBX FD 2 G 05 M C S D S M R
0-1-2
G-J-A-B
02 ---------- 30
M : pin F : socket (in relation with keying)
C: crimp; S: solder; P*: straight PCB tails ; Q*: Right Angle PCB tails
S: Outer shell brass alloy chrome over nickel plating
N: Outer shell in brass alloy with black plating (consult SOURIAU USA)
D: For all part numbers
S: All contact diameters except .05 mm P: 0.5 mm contact dimensions only
M: Connector with backnut for protective boot - Protective boot to order separately page 13
R: Red dot on shell for HG, HH, PE, FF only
* For receptacles with female contacts only.
31