HR10A-TC-02 Datasheet, PDF (15/20 Pages) List of Unclassifed Manufacturers – Push-Pull Connectors

■Contact
●Male pin
●Female pin
HR10 Series●Push-Pull Connectors

Unit : mm
Type HRS No. Part No. Type of plating Applicable cable
Loose ^{110-0515-6 HR10-PC-111 Partial gold plating AWG#26 to #30}
contact _{110-0513-0 HR10-PC-112 Silver plating AWG#26 to #30}
Chain ^{110-0516-9 HR10-PC-211 Partial gold plating AWG#26 to #30}
contact _{110-0514-3 HR10-PC-212 Silver plating AWG#26 to #30}
Remarks : 1.Use cables with a coating outside diameter of 1mm or less.
2.Loose-picce terminal are available in packs. Each pack
contains 100 terminals. Strip terminals are available in reels.
Each reel contains 10,000 terminals.

Unit : mm
Type HRS No. Part No. Type of plating Applicable cable
Loose ^{112-0410-0 HR12-SC-111 Partial gold plating AWG#26 to #30}
contact _{112-0411-3 HR12-SC-112 Silver plating AWG#26 to #30}
Chain ^{112-0407-6 HR12-SC-211 Partial gold plating AWG#26 to #30}
contact _{112-0408-9 HR12-SC-212 Silver plating AWG#26 to #30}
Remarks : 1.Use cables with a coating outside diameter of 1mm or less.
2.Loose-picce terminal are available in packs. Each pack
contains 100 terminals. Strip terminals are available in reels.
Each reel contains 10,000 terminals.
■Receptacle dip post arrangement dimensions
(4 Places)
(6 Places)
(10 Places)
(12 Places)
7-size 4 cores
7-size 6 cores
(5 Places)
(20 Places)
10-size 10 cores
10-size 12 cores
7-size 5 cores
13-size 20 cores
Remarks : 1.The above figures are views of receptacle-socket inserts from the mating side and plug-pin inserts from the wiring-connection
side.
2.Dimensional tolerance of ±0.05 is recommended for the board arrangement.
193