HR10A-TC-02 Datasheet, PDF (14/20 Pages) List of Unclassifed Manufacturers – Push-Pull Connectors

HR10 Series●Push-Pull Connectors
■Jack (Solder type)
HR10A-10TJ-12S(73)
(An example in shape)
HRS No.
Part No.
No.of pins ØA B ØC
110-0436-1-73 HR10A-10TJ-12S(73)
12
14.7 41.3 7
110-0459-7-73 HR10A-10TJ-12P(73)
12
14.7 41.3 7
110-1103-4-73 HR10A-10WTJ-12S(73)
12
14 46.5 6.5
*Waterproof jack need resin filling inside when connector assembly.
When mated, the connector against water penetration.
D
M13×0.75
M13×0.75
M12×0.75
Unit : mm
Remarks
*
■Panel mounting hole dimensions (Screw coupling)
The mounting hole dimensions shown below are for connectors to be tightened by a hexagonal nut from the back of
the panel. The dimensions below apply only to the HR10A-( )T and not the 7TR. For the dimensions of connectors of
other types, see page 198.
Type HR10A-10TR
(Panel thickness 1 to 2mm)
Type HR10A-10WTR
(Panel 1 thickness 1 to 2mm)
Type HR10A-13TR
(Panel thickness 1 to 1.5mm)
192