HR10A-TC-02 Datasheet, PDF (10/20 Pages) List of Unclassifed Manufacturers – Push-Pull Connectors

HR10 Series●Push-Pull Connectors
■Coaxial contacts
The coaxial contacts shown here are for use with the HR10B connector.These contacts have locking barbs and are
inserted from the rear of connector.Please use the following information to select the correct terminals.
■Material
Part
Plug shell
Jack shell
Insulator
Male pin
Female pin
Material
Brass
Brass
Tetrafluoride resin
Phosphor bronze
Beryllium copper
Finish
Gold plating
Gold plating
Gold plating
Gold plating
■Performance
Description
Impedance
Insulation resistance
Contact resistance
Withstanding voltage
V.S.W.R
Pull force
Test data
50ø
1000Mø or more at DC250V
Center 6.5mø or less and outer 4mø or less at DC1A
AC250V r.m.s for 1minute
1.3 or less for 0 to 1000MHz
4.9N 500gf or more
■Plug
HR10B-2.5CP(73)
■Jack
(clamp)
HRS No.
Part No.
110-0904-8-73 HR10B-2.5CP(73)
Applicable cable
0.8D-QEW-CW
(By Fjikura wire)
Unit : mm
Applicable connector
HR10B-10R-10SC(71)
HR10B-2.5CJ(73)
(clamp)
HRS No.
Part No.
110-0903-5-73 HR10B-2.5CJ(73)
Applicable cable
0.8D-QEW-CW
(By Fjikura wire)
Unit : mm
Applicable connector
HR10B-10P-10PC(71)
188