ICM200E Datasheet, PDF (26/32 Pages) List of Unclassifed Manufacturers – Megapixel (UXGA) Digital Color CMOS Image Sensor

ICM200E
2 Megapixel (UXGA) Digital Color CMOS Image Sensor
Preliminary Data Sheet V1.1
Sensor Timing
The following sections discuss the timing requirements and formats of the ICM200E image sensor. Note
that the timing requirements are relative to the pixel clock and the format depends on the subsampling
mode.
Reset Timing
The reset signal RSTN must be asserted for more than two stable clock cycles. In addition, the VDD
voltage ramp must be above 90% of its specified value for more than two stable clock cycles as shown in
Figure 7.
Figure 7. Reset Timing
Pixel Output Timing
The pixel data and timing output signals are DOUT [9:0], PCLK, VSYNC, and HSYNC. Data should be
latched at the rising edge of the PCLK. The VSYNC and HSYNC signals are asserted and de-asserted at
the falling edge of the PCLK. See Figure 8.
Figure 8. Pixel Output Timing
Copyright 2004, IC Media Corporation
http://www.ic-media.com/
Page 26
9/22/2004