ICM200E Datasheet, PDF (16/32 Pages) List of Unclassifed Manufacturers – Megapixel (UXGA) Digital Color CMOS Image Sensor

ICM200E
2 Megapixel (UXGA) Digital Color CMOS Image Sensor
Preliminary Data Sheet V1.1
Table 2. SIF Registers Descriptions (continued)
Bit Description
Default
0x01 TIMING_CONTROL_LOW
0x02 TIMING_CONTROL_HIGH
Timing control
[0] Column count enable. Set to 0x0 when filling the register
file. Set to 0x1 for normal operation.
[1] HSYNC polarity, 0x0: active low, 0x1: active high. The
DOUT[5] pin determines the initial value.
[2] VSYNC polarity, 0x0: active low, 0x1: active high. The
DOUT[6] pin determines the initial value.
[3] Reserved *
[4] Timing select, 0x0: register file timing, 0x1: default
timing
[8] IRST select, 0x0: from register file, 0x1: from
IRST_NUMBER register
[10] Reserved *
[12] Out-of-array exposure pointer control, 0x0: points to row
1217, 0x1: points to row 1221 (a non-existent row)
[13] Column stop. Setting to 0x0: causes the sensor column
counter to stop at 1599 when it is exceeding the real array.
Setting to 0x1: causes the sensor column counter to keep
counting.
0x03 TABLE_ADDR
Reserved*
0x04 WTRAM_DATA_L
0x05 WTRAM_DATA_M
0x06 WTRAM_DATA_H
Reserved*
0x07 TABLE_LEN
Reserved*
0x08 RAM_WRITE_ACTION
Reserved*
0x09 IRST_NUMBER_LOW
0x0A IRST_NUMBER_HIGH
Reserved*
0x0B
Reserved*
0x0C AD_WIDTHL
0x0D AD_WIDTHH
[10:0] Defines the frame width. The frame width must be
more than AD_COL_BEGIN+ 1620.
0x0E AD_HEIGHTL
0x0F AD_HEIGHTH
[15:0] Defines the frame height. The frame height must be
more than AD_ROW_BEGIN + 1220.
0x0011
0x00
0x000000
0x00
0x01
0x0000
0x0708
(1800)
0x0514
(1300)
Affected by
Latent
Register
Frame
Boundary
Update
N
N
N
N
N
N
N
N
N
N
N
N
Y
Y
Y
Y
Copyright 2004, IC Media Corporation
http://www.ic-media.com/
Page 16
9/22/2004