IA4420 Datasheet, PDF (24/29 Pages) List of Unclassifed Manufacturers – Universal ISM Band FSK Transceiver

IA4420
RX FIFO BUFFERED DATA READ
In this operating mode, incoming data are clocked into a 16 bit FIFO buffer. The receiver starts to fill up the FIFO when the Valid Data Indicator
(VDI) bit and the synchron pattern recognition circuit indicates potentially real incoming data. This prevents the FIFO from being filled with
noise and overloading the external microcontroller.
Polling Mode:
The nFFS signal selects the buffer directly and its content can be clocked out through pin SDO by SCK. Set the FIFO IT level to 1. In this case,
as long as FFIT indicates received bits in the FIFO, the controller may continue to take the bits away. When FFIT goes low, no more bits need
to be taken. An SPI read command is also available.
Interrupt Controlled Mode:
The user can define the FIFO level (the number of received bits) which will generate the nFFIT when exceeded. The status bits report the
changed FIFO status in this case.
FIFO Read Example with FFIT Polling
nSEL
SCK
0
1
2
3
4
nFFS
SDO
FIFO read out
FIFO OUT FO+1 FO+2 FO+3 FO+4
FFIT
During FIFO access fSCK cannot be higher than fref /4, where fref is the crystal oscillator frequency.
24