K3NR Datasheet, PDF (13/28 Pages) List of Unclassifed Manufacturers – High-speed, Intelligent Interface Modules

Nomenclature
1. SV Display
2. PV Display
3. Comparative Output
Status Indicators
4. SV Display Status
7. Status Indicators
8. Teaching Indicator
5. ESC Key
6. Mode Key
Name
1. SV display
2. PV display
3. Comparative output
status indicators
4. SV display status
5. ESC Key
6. Mode Key
7. Status indicators
8. Teaching indicator
9. RESET/TEACH Key
10. Up Key and Shift Key
9. RESET/TEACH Key
10. Up Key and Shift Key
Functions
Displays the set value or parameter. Available for Set Value LED Models only.
Displays the process value in addition to the max./min. value or parameter.
Displays the status of comparative output.
Indicates which comparative set value is currently on the SV display.
Used to return to the RUN mode from the Setting, Protect, or Maintenance mode.
The process value, maximum value, or minimum value to be displayed can be selected.
Used to enter the Setting mode.
Used to allow the PV display to indicate set values sequentially. Available for Basic Models only.
Used to indicate set values sequentially on the SV display. Available for Set Value LED Models only.
HOLD: Lit when HOLD input is ON.
MAX: Lit when the maximum value is indicated on the PV display.
MIN: Lit when the minimum value is indicated on the PV display.
PROG: Lit or flashes while parameters are being set.
Lit when the teaching function is enabled and flashes when the K3NR is in teaching operation.
The maximum value, minimum value, and counting values are reset by pressing this key.
Teaching is available when the teaching function is enabled.
The digit being set is scrolled by pressing the Shift Key. The set value increases by one whenever the Up Key is
pressed.
Frequency/Rate Meter K3NR K-141