HMS38112 Datasheet, PDF (8/73 Pages) List of Unclassifed Manufacturers – 4-BIT SINGLE CHIP MICROCOMPUTERS

Chapter 1.HMS38112
0.0098
0.0075
* 0.344
0.337
0.012
0.008
0.025 BSC
- NOTE -
0- 8
1. DIMENSION * MARK DOES NOT INCLUDE MOLD PROTRUSION.
MAXIMUM ALLOWABLE PROTRUSION IS 0.006 INCH PER SIDE.
2. DIMENSION ** MARK DOES NOT INCLUDE MOLD PROTRUSION.
MAXIMUM ALLOWABLE PROTRUSION IS 0.010 INCH PRE SIDE.
3. DIMENSIONING AND TOLERANCEING PER ANSI Y14.5M-1982.
4. UNSPECIFIED IS ACCORDING TO JEDEC MO-137, VARIATION “AD”.
Fig 1-5. 20SSOP (150MIL) Pin Dimension (UNIT : inch)
1-5