W3150 Datasheet, PDF (38/59 Pages) List of Unclassifed Manufacturers – WIZnet’s Online Technical Support

5.2.1.2. CLIENT mode
Whole process is shown as below.
Socket Initialization
Refer to 5.2.1.1 SERVER (The operation is same as SERVER).
CONNECT
Sends connection request to remote HOST(SERVER) is as below.
1. Write the value of IP Address and Port of remote peer(SERVER) to the Socket n Destination IP
Address Register(Sn_DIPR), Socket n Destination Port Register(Sn_DPORT).
2. Give CONNECT command to the Socket n Command Register(Sn_CR).
© Copyright 2005 WIZnet Co., Inc. All rights reserved.
íéñëç