SI5010 Datasheet, PDF (12/16 Pages) List of Unclassifed Manufacturers – OC-12/3, STM-4/1 SONET/SDH CLOCK AND DATA RECOVERY IC

Si5010
Pin Descriptions: Si5010
20 19 18 17 16
REXT 1
VDD 2
GND 3
REFCLK+ 4
REFCLK– 5
GND
Pad
15 PW RDN/CAL
14 VDD
13 DOUT+
12 DOUT–
11 VDD
6 7 8 9 10
Top View
Figure 10. Si5010 Pin Configuration
Pin #
1
Pin Name
REXT
2, 7, 11, 14
3, 8, 18, and
GND Pad
VDD
GND
4, 5
REFCLK+,
REFCLK–
6
LOL
9, 10
DIN+, DIN–
Table 8. Si5010 Pin Descriptions
I/O Signal Level
Description
External Bias Resistor.
This resistor is used by onboard circuitry to estab-
lish bias currents within the device. This pin must
be connected to GND through a 10 kΩ (1%) resis-
tor.
2.5 V
Supply Voltage.
Nominally 2.5 V.
GND
Supply Ground.
Nominally 0.0 V. The GND pad found on the bottom
of the 20-pin micro leaded package (see Figure 11)
must be connected directly to supply ground.
I
See Table 2 Differential Reference Clock.
The reference clock sets the initial operating fre-
quency used by the onboard PLL for clock and data
recovery. Additionally, the reference clock is used to
derive the clock output when no data is present.
O
LVTTL Loss of Lock.
This output is driven high when the recovered clock
frequency deviates from the reference clock by the
amount specified in Table 4 on page 7.
I
See Table 2 Differential Data Input.
Clock and data are recovered from the differential
signal present on these pins.
12
Preliminary Rev. 0.31