M12L128168A2L Datasheet, PDF (40/45 Pages) Elite Semiconductor Memory Technology Inc. – ABSOLUTE MAXIMUM RATINGS

ESMT
Self Refresh Entry & Exit Cycle
M12L128168A (2L)
*Note:
TO ENTER SELF REFRESH MODE
1. CS , RAS & CAS with CKE should be low at the same clock cycle.
2. After 1 clock cycle, all the inputs including the system clock can be don’t care except for CKE.
3. The device remains in self refresh mode as long as CKE stays “Low”.
cf.) Once the device enters self refresh mode, minimum t_RAS is required before exit from self refresh.
TO EXIT SELF REFRESH MODE
4. System clock restart and be stable before returning CKE high.
5. CS starts from high.
6. Minimum t_RFC is required after CKE going high to complete self refresh exit.
7. 4K cycles of burst auto refresh is required immediately before self refresh entry and immediately after self refresh exit.
Elite Semiconductor Memory Technology Inc.
Publication Date: Jun. 2012
Revision: 1.3
40/45