S1D13506 Datasheet, PDF (409/696 Pages) Epson Company – S1D13506 Color LCD/CRT/TV Controller

Epson Research and Development
Vancouver Design Center
Start pos
Pulse Width
TFT/FPFRAME (lines)
Start pos
Pulse width
Predefined Panels
Page 19
Specifies the delay (in pixels) from the start of the
horizontal non-display period to the leading edge of the
FPLINE pulse.
Specifies the delay (in pixels) from the start of the
horizontal non-display period to the leading edge of the
FPLINE pulse.
These settings allow fine tuning of the TFT/D-TFT
frame pulse parameters and are only available when the
selected panel type is TFT. Refer to S1D13506
Hardware Functional Specification, document number
X25B-A-001-xx, for a complete description of the
FPFRAME pulse settings.
Specify the delay (in lines) from the start of the vertical
non-display period to the leading edge of the
FPFRAME pulse.
Specifies the pulse width (in lines) of the FPFRAME
output signal.
13506CFG uses a file (panels.def) which lists various
panel manufacturers recommended settings. If the file
panels.def is present in the same directory as
13506cfg.exe, the settings for a number of predefined
panels are available in the drop-down list. If a panel is
selected from the list, 13506CFG loads the predefined
settings contained in the file.
13506CFG Configuration Program
Issue Date: 01/03/14
S1D13506
X25B-B-001-02