English
Language : 

E520.14 Datasheet, PDF (8/41 Pages) ELMOS Semiconductor AG – Provides four HS-CAN physical interfaces
Quad CAN transceiver
PRODUCTION DATA – FEB 4, 2014
E520.14
No.
Description
Condition
1 NORMAL mode current
VVS = 13.5V
consumption, all wake up sources all CANs are off, all
enabled
wake up sources
enabled
2 NORMAL mode current
VVS = 13.5V
consumption, WK wake up source all CANs are off,
enabled only
WK wake up
source enabled
only
3 Current share for CAN wake up
capability1)
VVS = 13.5V
4 Current share for WK wake up
capability1)
VVS = 13.5V
5 Current consumption in active
mode for each CAN
TXD=H
6 Current consumption in active
mode for each CAN. CAN does
not run under short current
conditions1)
TXD=L
RL = 50Ω to 65Ω
1) Not production tested
Symbol
IVS,NOM,1
IVS,NOM,2
IVS,CAN,NOM
IVS,WK,NOM
IVCC,ACT,REC
IVCC,ACT,DOM
Table 3: Characteristics NORMAL
No.
Description
1 undervoltage for UVS flag
falling 1)
2 undervoltage for UVS flag rising1)
3 undervoltage timeout at VS
4 undervoltage recovery time at VS
1) Comparator implements hysteresis of > 0.5V
Condition
VS falling
VS rising
Symbol
VUV,S,f
VUV,S,r
tS,UV,DET
tS,UV,REC
Table 4: Characteristics VS
Min Typ Max Unit
100 200 µA
80 170 µA
5
µA
2
µA
1.5
3
mA
40
65 mA
Min Typ Max Unit
3.3
4.3
V
4.2
5.2
V
65
270 ms
0.65
2.7 ms
No.
Description
Condition
1 undervoltage at VIO falling 1)
VIO falling
2 undervoltage at VIO, rising1)
VIO rising
3 undervoltage detection time at VIO
4 undervoltage recovery time at VIO
1) Comparator implements hysteresis of > 50mV
Symbol
VUV,VIO,f
VUV,VIO,r
tVIO,UV,DET
tVIO,UV,REC
Table 5: Characteristics VIO
Min Typ Max Unit
2.4
2.8
V
2.5
2.9
V
65
270 ms
0.65
2.7 ms
Elmos Semiconductor AG reserves the right to change the detail specifications as may be required to permit improvements in the design of its products.
Elmos Semiconductor AG
Data Sheet 8 / 41
QM-No.: 25DS2014E.02