English
Language : 

E520.14 Datasheet, PDF (5/41 Pages) ELMOS Semiconductor AG – Provides four HS-CAN physical interfaces
Quad CAN transceiver
PRODUCTION DATA – FEB 4, 2014
E520.14
1 Absolute Maximum Ratings
Stresses beyond these absolute maximum ratings listed below may cause permanent damage to the device. These are stress ratings only;
operation of the device at these or any other conditions beyond those listed in the operational sections of this document is not
implied. Exposure to absolute maximum rated conditions for extended periods may affect device reliability. All voltages with respect to ground.
Currents flowing into terminals are positive, those drawn out of a terminal are negative.
Description
Condition
Symbol
Min
Max
Unit
Voltage at VS
(1), (2)
VVS,max
-0.3
40
V
Thermal resistance junction to ambient for continuous
RTJA
21
K/W
QFN32L5 package
Based on method according to JEDEC
standards JESD-51-6 and JESD-51-7
Junction temperature
continuous
TJUNC
-40
150
°C
Ambient temperature
TAMB
-40
125
°C
Storage temperature, solded
continuous
TSTG,S
-55
150
°C
Storage temperature, unsolded
continuous
TSTG,U
-55
125
°C
Voltage at VIO
VVIO,max
-0.3
6.0
V
Voltage at VCC
VVCC_max
-0.3
6.0
V
Voltage at INH
VINH,DC
-0.3
VVS + 0.3
V
Voltage at CANL
VCANL_max
-27
40
V
Voltage at CANH
VCANH_max
-27
40
V
Voltage at TXD
VTXD_max
-0.3
6.0
V
Voltage at RXD
VRXD_max
-0.3
6.0
V
Voltage at WK
VWK
-0.3
40
V
Current at WK
continuous
IWK
-15
1
mA
ESD compliance for CANH and CANL According
VESD
-6
6
kV
IEC61000-4-2 and
HBM AEC-Q100
against GND
ESD compliance for VS and WAKE
According HBM
VESD
-4
4
kV
AEC-Q100
ESD compliance for all other pins
According HBM
VESD
-2
2
kV
AEC-Q100
MM compliance at any pin
According AEC-
VESD
-200
200
V
Q100
CDM compliance for corner pins
According AEC-
VESD
-750
750
V
Q100
CDM compliance for non corner pins
According AEC-
VESD
-500
500
V
Q100
1. the device is implicitly protected against load dump
2. the device is implicitly protected against jump start
Elmos Semiconductor AG reserves the right to change the detail specifications as may be required to permit improvements in the design of its products.
Elmos Semiconductor AG
Data Sheet 5 / 41
QM-No.: 25DS2014E.02