BCM20707 Datasheet, PDF (47/65 Pages) Cypress Semiconductor – Complies with Bluetooth Core Specification version 4.2 including BR/EDR/BLE

BCM20707 Preliminary Data Sheet
RF Specifications
Table 17: BLE RF Specifications
Parameter
Conditions
Minimum Typical Maximum Unit
Frequency range
Rx sense^a
Tx power^b
Mod Char: Delta F1 average
Mod Char: Delta F2 max^c
Mod Char: Ratio
N/A
GFSK, 0.1% BER, 1 Mbps
N/A
N/A
N/A
N/A
2402
–
–
225
99.9
0.8
–
–96.5
9
255
–
0.95
2480
–
–
275
–
–
MHz
dBm
dBm
kHz
%
%
a. Dirty Tx is Off.
b. The BLE Tx power can be increased to compensate for front-end losses such as BPF, diplexer, switch, etc. The
output is capped at 12 dBm out. The BLE Tx power at the antenna port cannot exceed the 10 dBm EIRP
specification limit.
c. At least 99.9% of all delta F2 max frequency values recorded over 10 packets must be greater than 185 kHz.
Broadcom^®
May 27, 2016 • 20707-DS206-R
BROADCOM CONFIDENTIAL
Bluetooth SoC
Page 46