BCM20713A1KUFBXG Datasheet, PDF (46/65 Pages) Cypress Semiconductor – Single-Chip Bluetooth Transceiver and Baseband Processor

BCM20713 Preliminary Data Sheet
Electrostatic Discharge Specifications
Table 18: Current Consumption—Class 2 (2 dBm)
Operational Mode
Conditions
Typical Unit
Receive (1 Mbps)
Current level during receive of a basic rate packet
31
mA
Transmit (1 Mbps)
Current level during transmit of a basic rate packet, GFSK
44
mA
output power = 2 dBm
Receive (EDR)
Current level during receive of a 2 or 3 Mbps rate packet
32
mA
Transmit (EDR)
Current level during transmit of a 2 or 3 Mbps rate packet,
41
mA
GFSK output power = 2 dBm
DM1/DH1
Average current during basic rate max throughput connection, 35
mA
which includes only this packet type.
DM3/DH3
Average current during basic rate max throughput connection, 36
mA
which includes only this packet type.
DM5/DH5
Average current during max basic rate throughput connection, 37
mA
which includes only this packet type.
HV1
Average current during SCO voice connection consisting of
28
mA
only this packet type. ACL channel is in 500 ms sniff.
HV2
Average current during SCO voice connection consisting of
17
mA
only this packet type. ACL channel is in 500 ms sniff.
HV3
Average current during SCO voice connection consisting of
13
mA
only this packet type. ACL channel is in 500 ms sniff.
HCI only active
Average current when waiting for HCI command UART or SPI 4.8
mA
transports.
Sleep
UART transport active, external LPO clock available.
55
A
Sleep, HV Reg Bypass UART transport active, external LPO clock available, HV LDO 45
A
disabled and in bypass mode.
Inquiry Scan (1.28 sec) Periodic scan rate is 1.28 sec.
350
A
Page Scan (R1)
Periodic scan rate is R1 (1.28 sec).
350
A
Inquiry Scan + Page
Both inquiry and page scans are interlaced together at 1.28 sec 630
A
Scan (R1)
periodic scan rate.
Sniff master (500 ms)
Attempt and timeout parameters set to 4. Quality connection 145
A
which rarely requires more than minimum packet exchange.
Sniff slave (500 ms)
Attempt and timeout parameters set to 4. Quality connection 135
A
which rarely requires more than minimum packet exchange.
Sniff master follows optimal sniff protocol of BCM20713 master.
Sniff (500 ms) + Inquiry/ Same conditions as Sniff master and Page Scan (R1). Scan 425
A
Page Scan (R1)
can be either Inquiry Scan or Page Scan at 1.28 sec periodic
scan rate.
Sniff (500 ms) + Inquiry Same conditions as Sniff master and Inquiry Scan + Page
730
A
Scan + Page Scan (R1) Scan.
Broadcom^®
December 21, 2015 • 20713-DS102-R
Single-Chip Bluetooth Transceiver and Baseband Processor
Page 45
BROADCOM CONFIDENTIAL