BCM20713A1KUFBXG Datasheet, PDF (41/65 Pages) Cypress Semiconductor – Single-Chip Bluetooth Transceiver and Baseband Processor

BCM20713 Preliminary Data Sheet
Electrical Characteristics
Section 8: Electrical Characteristics
Note: All voltages listed in Table 10 are referenced to V_DD.
Table 10: Absolute Maximum Ratings
Rating
DC supply voltage for RF
DC supply voltage for core
DC supply voltage for I/O
DC supply voltage for PA
Maximum voltage on input or output pins
Minimum voltage on input or output pins
Storage temperature
Signal/Parameter
VDD_RF^a
VDDC
VDDO^b
VDDTF
VIMAX
VIMIN
TSTG
Value
1.32
1.32
3.6
3.3
VDDO + 0.3
VSS – 0.3
–40 to 125
Unit
V
V
V
V
V
V
°C
a. VDD_RF collectively refers to the VDDIF, VDDLNA, VDDPX, and VDDRF RF power supplies.
b. If VDDO is not applied, voltage should never be applied to any digital I/O pins (I/O pins should never be driven
or pulled high). The list of digital I/O pins includes the following (these pins are listed in Section 7: “Pin
Information,” on page 36 with VDDO shown as their power domain):
GPIO[3], GPIO[5], GPIO[6]
SCL, SDA
N_MODE
SPIM_CS_N, SPIM_CLK
Broadcom^®
December 21, 2015 • 20713-DS102-R
Single-Chip Bluetooth Transceiver and Baseband Processor
Page 40
BROADCOM CONFIDENTIAL