MB39C015 Datasheet, PDF (32/43 Pages) Cypress Semiconductor – High efficiency : 96% (Max)

MB39C015
13. Usage Precautions
1. Do not configure the IC over the maximum ratings
If the lC is used over the maximum ratings, the LSl may be permanently damaged.It is preferable for the device to normally operate
within the recommended usage conditions. Usage outside of these conditions adversely affect the reliability of the LSI.
2. Use the devices within recommended operating conditions
The recommended operating conditions are the conditions under which the LSl is guaranteed to operate.The electrical ratings are
guaranteed when the device is used within the recommended operating conditions and under the conditions stated for each item.
3. Printed circuit board ground lines should be set up with consideration for common impedance
4. Take appropriate static electricity measures
• Containers for semiconductor materials should have anti-static protection or be made of conductive material.
• After mounting, printed circuit boards should be stored and shipped in conductive bags or containers.
• Work platforms, tools, and instruments should be properly grounded.
• Working personnel should be grounded with resistance of 250 kΩ to 1 MΩ between body and ground.
5. Do not apply negative voltages
The use of negative voltages below 0.3 V may create parasitic transistors on LSI lines, which can cause abnormal operation.
14. Ordering Information
Part number
MB39C015WQN
Package
24-pin plastic QFN
(LCC-24P-M10)
Remarks
Exposed PAD
Document Number: 002-08364 Rev. *A
Page 32 of 43