MB39C015 Datasheet, PDF (10/43 Pages) Cypress Semiconductor – High efficiency : 96% (Max)

MB39C015
6. Absolute Maximum Ratings
Parameter
Power supply voltage
Signal input voltage
XPOR pull-up voltage
LX voltage
LX Peak current
Power dissipation
Operating ambient
temperature
Storage temperature
Symbol
VDD
VISIG
VIXPOR
VLX
IPK
PD
Condition
AVDD  DVDD1  DVDD2
OUT1/OUT2 pins
CTLP, CTL1/CTL2,
MODE1/MODE2 pins
VREFIN1/VREFIN2 pins
VDET pin
XPOR pin
LX1/LX2 pins
ILX1/ILX2
Ta  25 °C
Ta  85 °C
Ta
–
TSTG
–
Min
0.3
0.3
0.3
Rating
Max
6.0
VDD  0.3
VDD  0.3
0.3
0.3
0.3
0.3
–
–
–
–
–
40
VDD  0.3
VDD  0.3
6.0
VDD  0.3
1.8
3125*¹, *², *³
1563*¹, *², *⁴
1250*¹, *², *³
625*¹, *², *⁴
85
55
125
Unit
V
V
V
V
A
mW
mW
°C
°C
*1 _{: Power dissipation value between + 25 °C and + 85 °C is obtained by connecting these two points with straight line.}
*2 _{: When mounted on a four-layer epoxy board of 11.7 cm × 8.4 cm}
*3 _{: Connection at exposure pad with thermal via. (Thermal via 9 holes)}
*4 _{: Connection at exposure pad, without a thermal via.}
Notes:
• The use of negative voltages below  0.3 V to the AGND, DGND1, and DGND2 pin may create parasitic
transistors on LSI lines, which can cause abnormal operation.
• This device can be damaged if the LX1 pin and LX2 pin are short-circuited to AVDD and DVDD1/DVDD2,
or AGND and DGND1/DGND2.
WARNING: Semiconductor devices can be permanently damaged by application of stress (voltage, current,
temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings.
Document Number: 002-08364 Rev. *A
Page 10 of 43