CCP-1-30CC Datasheet, PDF (5/12 Pages) Cooper Bussmann, Inc. – Compact Circuit Protector DIN-Rail fused disconnect switches

Compact Circuit Protector (CCP)
UL Class CC, CF (CUBEFuse), midget and IEC 10x38mm
fused disconnect switches
Technical Data 1157
Effective March 2016
1-, 2- and 3-Pole — Class CF
Description:
The revolutionary Bussmann series
Compact Circuit Protector (CCP) fused
disconnect switch with CUBEFuse™is 2/3
the footprint of a traditional fusible switch
and provides a high 200kA SCCR that can
help increase assembly SCCR.
Specifications:
Ratings
Volts
• 600Vac
• 125Vdc (up to 80A max)
Amps
• 30, 60, 100A
SCCR
• 200kA AC
• 100kA DC (up to 80A max)
Poles
• 1-, 2-, 3-pole
Agency information
• UL 98 Listed, File E302370, Guide WHTY
• cULus to CSA Standard 22.2 No. 4-04, File 302370,
Guide WHTY7
• CE
• RoHS compliant
Conductors 75°C Cu or higher
• 30 to 60A CCPs: - Single/dual 18-6AWG solid or stranded
- Single 4AWG solid or stranded
• 100A CCPs
- Single 10-8AWG solid
- Single 8-1AWG stranded
- Dual 6AWG stranded
Terminals
• Single/dual conductor box lug or fork terminal suitable for line,
load or accessory connection
• Torque: 0-60A: - 18-10AWG 20 Lb-In

- 8-6AWG 35Lb-In

- 4AWG 35 Lb-In
70-100A: - 18-10AWG single 25 Lb-In

- 8-1AWG single 40 Lb-In

- 6AWG dual 45 Lb-In
Fuses
• Uses finger-safe Class CF Bussmann series CUBEFuse with
Class J performance
• Bussmann series Low-Peak™ dual-element, time-delay*
• Non-indicating 1-100A
• Indicating 6-100A
• Fast-acting, non-indicating 1-100A**
* See data sheet No. 9000.
**See data sheet No. 2147.
Storage and operating temperature
• -20°C to 75°C***
*** For fuse performance under or above 25°C, consult fuse performance
derating charts in the Bussmann Division publication titled Selecting
Protective Devices (SPD) No. 3002.
Flammability rating
• UL 94V0
Lockout/tagout provisions
• 4mm shank lock
Mounting
• 35mm DIN-Rail
Local open fuse indication minimum voltage^†
• 90V
† Open fuse indication requires an open fuse to be in the CCP and the switch
in the ON position.
Accessories
• Auxiliary contacts
• PLC wired remote fuse indication
• Bussmann series CUBEFuse fuse pullers (P/Ns: CFP-30,
CFP-60, CFP-100)
Shipping weight
• 2.03 lbs (0.92kg) per carton
Carton quantity
• Six (6) poles
Features:
• Uses Class CF finger-safe fast-acting and time-delay
CUBEFuse with Class J electrical performance
• Extremely compact design at 25.4mm (1 inch) wide per pole
• Ampacity rejecting disconnects will not accept Bussmann
series CUBEFuse amp ratings greater than switch rating
• High Short-Circuit Current Ratings at 200kA
• Disconnect rated to provide means for load isolation
• Full voltage rated at 600Vac
• 125Vdc rated up to 80A max
• UL 98 Listed and suitable for branch circuit disconnect and
branch circuit protection
• 1-, 2- and 3-pole versions are horsepower rated
• Complies with UL and CSA
• Open fuse indication:
• Local fuse indication lights are standard
• Optional wired remote open fuse indication can be utilized
to signal a PLC and open a contactor to de-energize all
phases, if required
• Additional open fuse indication can be provided by the
Bussmann series CUBEFuse
• IP20 finger-safe construction with 10AWG (6mm²) wire or
larger
• Built-in switch interlock capability prohibits removing the fuse
under load
• Padlockable handle for lockout/tagout procedures
Eaton.com/bussmannseries
5