HBCU-5710R Datasheet, PDF (7/25 Pages) AVAGO TECHNOLOGIES LIMITED – Designed for Industry-Standard MSA-Compliant, Small Form Factor Pluggable (SFP) Ports

Absolute Maximum Ratings
Parameter
Storage Temperature
Case Temperature
Relative Humidity
Module Supply Voltage
Data/Control Input Voltage
Sense Output Current - MOD-DEF 2
Symbol
T_S
T_C
RH
V_CCT,R
V_I
Minimum
-40
-40
5
-0.5
-0.5
Typical
Maximum Unit
+75
°C
+75
°C
95
%
3.6
V
V_CC
V
5.0
mA
Notes
Note 1
Note 1, 2
Note 1
Note 1, 2
Note 1
Recommended Operating Conditions
Parameter
Symbol
Minimum Typical
Maximum Unit
Notes
Case Temperature
Module Supply Voltage
Data Rate
T_C
0
V_CCT,R
3.135
3.3
1.25
+70
°C
3.465
V
Gb/s
Note 3
Note 3
Note 3
Transceiver Electrical Characteristics
(T_C = 0 °C to +70 °C, V_CCT, R = 3.3 V ± 5%)
Parameter
Symbol
Minimum Typical
Maximum Unit Notes
Bit Error Rate
BER
10^-10
Note 4
AC Electrical Characteristics
Power Supply Noise Rejection (peak-peak)
PSNR
100
mV
Note 5
DC Electrical Characteristics
Module supply current
I_CC
370
mA
Note 6
Power Dissipation
P_DISS
1150
mW
Sense Outputs:
MOD-DEF 2
V_OH
2.4
V_OL
V_CCT,R+0.3 V
0.4
V
Note 7
Control Inputs:
Transmitter Disable
MOD-DEF 1,2
V_IH
2.0
V_IL
0
V_CC
V
Note 7
0.8
V
Control Inputs:
Transmitter Disable
(TX_DISABLE)
V_IH
2.0
V_IL
0
V_CC
V
0.4
V
Notes:
1. Absolute Maximum Ratings are those values beyond which damage to the device may occur if these limits are exceeded for other than a short
period of time. See Reliability Data Sheet for specific reliability performance.
2. Between Absolute Maximum Ratings and the Recommended Operating Conditions functional performance is not intended, device reliability
is not implied, and damage to the device may occur over an extended period of time.
3. Recommended Operating Conditions are those values outside of which functional performance is not intended, device reliability is not implied,
and damage to the device may occur over an extended period of time. See Reliability Data Sheet for specific reliability performance later when
it is ready.
4. 100 m Cat 5 cable.
5. MSA-specified filter is required on the host board to achieve PSNR performance over the frequency range 10 Hz to 2 MHz.
6. ICC max at 3.1 V, +70 °C.
7. LVTTL, external 4.7-10 KW pull-Up resistor required.