HCPL-3180-500E Datasheet, PDF (1/16 Pages) AVAGO TECHNOLOGIES LIMITED – 2.5 Amp Output Current, High Speed, Gate Drive Optocoupler

HCPL-3180
2.5 Amp Output Current, High Speed, Gate Drive Optocoupler
Data Sheet
Lead (Pb) Free
RoHS 6 fully
compliant
RoHS 6 fully compliant options available;
-xxxE denotes a lead-free product
Description
This family of devices consists of a GaAsP LED. The LED
is optically coupled to an integrated circuit with a power
stage. These optocouplers are ideally suited for high
frequency driving of power IGBTs and MOSFETs used in
Plasma Display Panels, high performance DC/DC convert-
ers, and motor control inverter applications.
Functional Diagram
N/C 1
ANODE 2
CATHODE 3
N/C 4
SHIELD
8 V_CC
7 V_O
6 V_O
5 V_EE
Features
• 2.5 A maximum peak output current
• 2.0 A minimum peak output current
• 250 kHz maximum switching speed
• High speed response: 200 ns maximum propagation delay over
temperature range
• 10 kV/µs minimum Common Mode Rejection (CMR) at V_CM=
1500 V
• Under Voltage Lock-Out protection (UVLO) with hysteresis
• Wide operating temperature range:–40°C to 100°C
• Wide V_CC operating range: 10 V to 20 V
• 20 ns typical pulse width distortion
• Safety approvals:
– UL approval, 3750 V_rms for 1 minute
– CSA approval
– IEC/EN/DIN EN 60747-5-2 approval
A 0.1 µF bypass capacitor must be con-
nected between pins V_CC and Ground.
Applications
• Plasma Display Panel (PDP)
• Distributed Power Architecture (DPA)
• Switch Mode Rectifier (SMR)
• High performance DC/DC converter
• High performance Switching Power Supply (SPS)
• High performance Uninterruptible Power Supply (UPS)
• Isolated IGBT/Power MOSFET gate drive
CAUTION: It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation, which may be induced by ESD.