SAM7S16_14 Datasheet, PDF (564/775 Pages) ATMEL Corporation – Internal High-speed Flash

Table 37-7. Power Consumption for Different Modes
Mode
Conditions
Consumption Unit
Voltage regulator is on.
Brown Out Detector is activated.
Flash is read.
PLL is activated.
Active, running out of Flash, 50 MHz ARM Core clock is 50 MHz.
(SAM7S64/321/32/161/16)
Analog-to-Digital Converter activated.
All peripheral clocks activated.
USB transceiver enabled.
onto AMP1
onto AMP2
28.3
mA
28.1
Voltage regulator is on.
Brown Out Detector is activated.
Flash is read.
PLL is activated.
Active, running out of Flash, 50 MHz ARM Core clock is 50 MHz.
(SAM7S512/256/128)
Analog-to-Digital Converter activated.
All peripheral clocks activated.
USB transceiver enabled.
onto AMP1
onto AMP2
30.8
mA
30.6
Voltage regulator is on.
Brown Out Detector is activated.
Flash is read.
PLL is activated.
Active, running out of Flash, 55 MHz ARM Core clock is 55 MHz.
(SAM7S64/321/32/161/16)
Analog-to-Digital Converter activated.
All peripheral clocks activated.
USB transceiver enabled.
onto AMP1
31.7
mA
onto AMP2
31.5
Voltage regulator is on.
Brown Out Detector is activated.
Flash is read.
PLL is activated.
Active, running out of Flash, 55 MHz ARM Core clock is 55 MHz.
(SAM7S512/256/128)
Analog-to-Digital Converter activated.
All peripheral clocks activated.
USB transceiver enabled.
onto AMP1
onto AMP2
33.3
mA
33.1
SAM7S Series [DATASHEET]
6175M–ATARM–26-Oct-12
564