SAM4CM_14 Datasheet, PDF (121/1177 Pages) ATMEL Corporation – Atmel | SMART ARM-based Flash MCU

S
is an optional suffix. If S is specified, the condition code flags are updated on the result of the
operation, see “Conditional Execution” .
cond
is an optional condition code, see “Conditional Execution” .
Rd
is the destination register.
Rn
is the register holding the first operand.
Operand2 is a flexible second operand. See “Flexible Second Operand” for details of the
options.
Operation
The AND, EOR, and ORR instructions perform bitwise AND, Exclusive OR, and OR operations on the values in Rn
and Operand2.
The BIC instruction performs an AND operation on the bits in Rn with the complements of the corresponding bits in
the value of Operand2.
The ORN instruction performs an OR operation on the bits in Rn with the complements of the corresponding bits in
the value of Operand2.
Restrictions
Do not use SP and do not use PC.
Condition Flags
If S is specified, these instructions:
 Update the N and Z flags according to the result
 Can update the C flag during the calculation of Operand2, see “Flexible Second Operand”
 Do not affect the V flag.
SAM4CM Series [DATASHEET]
Atmel-11203C-ATARM-SAM4CM32-SAM4CM16-SAM4CM8-Datasheet_06-Oct-14
121