EP1AGX Datasheet, PDF (133/234 Pages) Altera Corporation – Section I. Arria GX Device Data Sheet

Chapter 4: DC and Switching Characteristics
4–11
Operating Conditions
Table 4–7. Arria GX Transceiver Block AC Specification (Note 1), (2), (3) (Part 4 of 4)
Description
Condition
SDI Receiver Jitter Tolerance (8)
Jitter Frequency = 15 KHz
Data Rate = 2.97 Gbps (3G)
REFCLK = 148.5 MHz
Pattern = Single Line
Scramble Color Bar
No Equalization
DC Gain = 0 dB
Sinusoidal Jitter Tolerance
(peak-to-peak)
Jitter Frequency = 100 KHz
Data Rate = 2.97 Gbps (3G)
REFCLK = 148.5 MHz
Pattern = Single Line Scramble Color Bar
No Equalization
DC Gain = 0 dB
Jitter Frequency = 148.5 MHz
Data Rate = 2.97 Gbps (3G)
REFCLK = 148.5 MHz
Pattern = Single Line
Scramble Color Bar
No Equalization
DC Gain = 0 dB
Sinusoidal Jitter Tolerance
(peak-to-peak)
Jitter Frequency = 20 KHz
Data Rate = 1.485 Gbps (HD)
REFCLK = 74.25 MHz
Pattern = 75% Color Bar
No Equalization
DC Gain = 0 dB
Jitter Frequency = 100 KHz
Data Rate = 1.485 Gbps (HD)
REFCLK = 74.25 MHz
Pattern = 75% Color Bar
No Equalization
DC Gain = 0 dB
Notes to Table 4–7:
(1) Dedicated REFCLK pins were used to drive the input reference clocks.
(2) Jitter numbers specified are valid for the stated conditions only.
(3) Refer to the protocol characterization documents for detailed information.
(4) The jitter numbers for XAUI are compliant to the IEEE802.3ae-2002 Specification.
(5) The jitter numbers for PCI Express are compliant to the PCIe Base Specification 2.0.
(6) The jitter numbers for Serial RapidIO are compliant to the RapidIO Specification 1.3.
(7) The jitter numbers for GIGE are compliant to the IEEE802.3-2002 Specification.
(8) The HD-SDI and 3G-SDI jitter numbers are compliant to the SMPTE292M and SMPTE424M specifications.
–6 Speed Grade
Commercial & Units
Industrial
>2
UI
> 0.3
UI
> 0.3
UI
>1
UI
> 0.2
UI
© December 2009 Altera Corporation
Arria GX Device Handbook, Volume 1