AK4555 Datasheet, PDF (9/17 Pages) Asahi Kasei Microsystems – Low Power & Small Package 20bit ΔΣ CODEC

ASAHI KASEI
[AK4555]
OPERATION OVERVIEW
„ System Clock Input
The AK4555 can be input MCLK=256fs, 384fs, 512fs, 768fs or 1024fs (fs is equal to or lower than 25kHz when MCLK
is 1024fs). The input clock applied to the MCLK pin as internal master clock is divided into 256fs automatically. When
MCLK is 1024fs, oversampling rate of D/A converter is automatically changed from 128fs to 256fs. The relationship
between the external clock applied to the MCLK input and the desired sample rate is defined in Table 1. The LRCK clock
input should be synchronized with MCLK. The phase between these clocks does not matter. *fs is sampling frequency.
When the synchronization is out of phase by changing the clock frequencies during normal operation, the AK4555 may
occur click noise. In case of DAC, click noise is avoided by setting the inputs to “0”.
All external clocks(MCLK, SCLK and LRCK) must be present unless PWADN=PWDAN= “L”. If these clocks are not
provided, the AK4555 may draw excess current and may not possibly operate properly because the device utilizes
dynamic refreshed logic internally.
fs
8.0kHz
16.0kHz
32.0kHz
44.1kHz
48.0kHz
256fs
2.0480MHz
4.0960MHz
8.1920MHz
11.2896MHz
12.2880MHz
384fs
3.0720MHz
6.1440MHz
12.2880MHz
16.9344MHz
18.4320MHz
MCLK
512fs
768fs
1024fs
4.0960MHz 6.1440MHz 8.1920MHz
8.1920MHz 12.2880MHz 16.3840MHz
16.3840MHz 24.5760MHz
N/A
22.5792MHz 33.8688MHz
N/A
24.5760MHz 36.8640MHz
N/A
Table 1. System Clock Example
SCLK
32fs
64fs
0.2560MHz 0.512MHz
0.5120MHz 1.024MHz
1.0240MHz 2.048MHz
1.4112MHz 2.822MHz
1.5360MHz 3.072MHz
For low sampling rates, outband noise causes S/N of DAC to degrade. S/N is improved by setting MCLK to 1024fs. Table
2 shows S/N of DAC output.
fs
MCLK
S/N(fs=8kHz, A-weighted)
8kHz ∼ 50kHz
256fs/384fs/512fs/768fs
84dB
8kHz ∼ 25kHz
1024fs
90dB
Table 2. Relationship among fs, MCLK frequency and S/N of DAC
MS0363-E-01
-9-
2005/08