AK8853XQ Datasheet, PDF (8/70 Pages) Asahi Kasei Microsystems – NTSC/PAL/SECAM Digital Video Decoder

[AK8853XQ/ VN]
4.3 DC characteristics
Where no specific condition is indicated in the following table, the supply voltage range
is the same as that shown for the recommended operating conditions in 4-2 above.
Parameter
Symbol
Min
Typ
Max
Units Condition
Digital P2 input high
voltage
0.8PVDD2
–
VIH
0.7PVDD2
–
–
V
Case 1^a
–
V
Case 2^b
Digital P2 input low
voltage
VIL
–
–
–
0.2PVDD2
V
–
0.3PVDD2
V
Case 1^a
Case 2^b
Digital D input high voltage VDIH 0.8DVDD
–
–
V
–
Digital D input low voltage VDIL
–
–
0.2DVDD
V
–
Digital input leak current
IL
–
–
±10
uA
–
Digital output high voltage VOH 0.7PVDD1
–
–
– IOH = −600uA
Digital output low voltage VOL
–
–
0.3PVDD1
–
IOL = 1mA
I²C (SDA)L output
VOLC
–
–
0.3 PVDD2
V IOLC = 3mA
a_{DVDD = 1.70V~2.00V, 1.70V≤PVDD1<2.70V, 1.70V≤PVDD2<2.70V, Ta: Recommended Operating Temp.}
b_{DVDD = 1.70V~2.00V, 2.70V≤PVDD1≤3.60V, 2.70V≤PVDD2≤3.60V, Ta: Recommended Operating Temp.}
Definition of above input/output terms
Digital P2 input: Collective term for SDA, SCL, SELA, OE, PDN, RSTN pin inputs.
Digital D input: Collective term for CLKMD, TEST0, TEST1 pin inputs.
Digital output: Collective term for DTCLK, DATA[7:0], HD, VD_F, DVALID_F, NSIG pin outputs.
SDA pin output: Not termed digital pin output unless otherwise specifically stated.
Rev-E-00
8
2008/01