AK8853XQ Datasheet, PDF (37/70 Pages) Asahi Kasei Microsystems – NTSC/PAL/SECAM Digital Video Decoder

[AK8853XQ/ VN]
Macrovision Status-Register: Indicates Macrovision signal type, if decoded data contains Macrovision
signal
Bit Register Name
Description
Definition
[0]: No Macrovision AGC process detected
bit 0
AGCDET
AGC Process Detect _{[1]: Macrovision AGC process detected}
[0]: No Macrovision Color Stripe process detected
bit 1
CSDET
Color Stripe Detect _{[1]: Macrovision Color Stripe process detected}
bit 2
CSTYPE
[0]: Color Stripe Type 2 in input signal
Color Stripe Type _{[1]: Color Stripe Type 3 in input signal}
Input Video Status-Register: Indicates status of automatic input signal detection
BIT
Register
Name
Status
Indication
Input signal subcarrier frequency:
bit 0
~
bit 1
ST_VSCF0
~
ST_VSCF1
Status of Video
Sub-Carrier Frequency
[ST_VSCF1: ST_VSCF0] (MHz)
[00]: 3.57954545 (NTSC-M, J)
[01]: 3.57561149 (PAL-M)
[10]: 3.58205625 (PAL-Nc)
[11]: 4.43361875 (PAL-B, D, G, H, I, N, 60;
NTSC-4.43, SECAM*)
Input signal color encode format:
bit 2
~
bit 3
ST_VCEN0
~
ST_VCEN1
Status of Video
Color Encode
[ST_VCEN1: ST_VCEN0]
[00]: NTSC
[01]: PAL
[10]: SECAM
[11]: Reserved
bit 4
ST_VLF
Status of Video
Line Frequency
Input signal line frequency
[0]: 525 line (NTSC-M, J; NTSC-4.43, PAL-M, 60)
[1]: 625 line (PAL-B, D, G, H, I, N, Nc; SECAM)
Input signal monochrome or non-monochrome¹:
bit 5 ST_BW Status of B/W Signal
[0]: Non-monochrome detected
[1]: Monochrome
Input signal presence or absence²:
bit 6 UNDEF Un_define bit
[0]: Input signal detected
bit 7
FIXED
Input Video Standard
fixed bit
[1]: No input signal detected
Input signal detection phase³:
[0]: Input signal search in progress
[1]: Input signal search complete
*If input signal is identified as SECAM, ST_VSCF[1:0] changes to [11].
1_{Monochrome auto detection is enabled if the color killer setting is ON(COLKILL-bit = [1]).}
ST_BW-bit changes to [1] when the color killer operates.
If the user has deliberately entered the B/W-bit setting Sub Address 0x01, input signal detection
is limited to 525/625 line detection, and only the ST_VLF information is relevant.
2_{Shows results of input signal detection.}
If an input signal is detected, the value is [0]; if no input signal is detected, the value is [1].
3_{Shows the operating phase of the automatic input signal detector.}
The value is [0] while the detection operation is in progress, and [1] when it is completed;
thus, when UNDEF-bit = [1], FIXED-bit = [0].
Rev-E-00
37
2008/01