AK8185A Datasheet, PDF (4/12 Pages) Asahi Kasei Microsystems – Low - Jitter Clock Generator with Integrated VCO

AK8185A
Absolute Maximum Rating
Over operating free-air temperature range unless otherwise noted ⁽¹⁾
Parameter
Value
Unit
Supply voltage range
(Vｃｃ_out, Vcc__PLL1 ,Vcc__PLL2, Vcc__VCO , Vcc__IN )
Input voltage range
Input current range
-0.3 to 4.3V
V
GND-0.3 to V_CC+0.3
V
-10 to +10
mA
Storage temperature
-55to 125
C
Note
(1) Stress beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device.
These are stress ratings only. Functional operation of the device at these or any other conditions beyond those
indicated under “Recommended Operating Conditions” is not implied. Exposure to absolute-maximum-rating
conditions for extended periods may affect device reliability. Electrical parameters are guaranteed only over the
recommended operating temperature range.
ESD Sensitive Device
This device is manufactured on a CMOS process, therefore, generically susceptible to
damage by excessive static voltage. Failure to observe proper handling and
installation procedures can cause damage. AKM recommends that this device is handled with
appropriate precautions.
Recommended Operating Conditions
Parameter
Output supply voltage
PLL supply voltage
PLL supply voltage
On-chip VCO supply voltage
Input supply voltage
Ambient temperature
Symbol
Vｃｃ_out
Vcc__PLL1
Vcc__PLL2
Vcc__VCO
Vcc__IN
Ta
Min
Typ
Max
Unit
3.0
3.3
3.6
V
3.0
3.3
3.6
V
3.0
3.3
3.6
V
3.0
3.3
3.6
V
3.0
3.3
3.6
V
-40
85
C
draft-E-02
Dec. 2012
-4-