ADG636YRU-REEL Datasheet, PDF (9/16 Pages) Analog Devices – 1 pC Charge Injection, 100 pA Leakage, CMOS, ±5 V/+5 V/+3 V Dual SPDT Switch

ABSOLUTE MAXIMUM RATINGS
TA = 25°C, unless otherwise noted.
Table 4.
Parameter
VDD to VSS
VDD to GND
VSS to GND
Analog Inputs¹
Digital Inputs¹
Peak Current, S or D (Pulsed at 1 ms,
10% Duty Cycle Maximum)
Continuous Current, S or D
Operating Temperature Range
Storage Temperature Range
Junction Temperature
TSSOP Package
θJA Thermal Impedance
θJC Thermal Impedance
Lead Soldering
Lead Temperature, Soldering (10 sec)
IR Reflow, Peak Temperature (<20 sec)
Pb-Free Soldering
Reflow, Peak Temperature
Time at Peak Temperature
Rating
13 V
−0.3 V to +6.5 V
+0.3 V to −6.5 V
VSS − 0.3 V to VDD + 0.3 V
−0.3 V to VDD + 0.3 V or
30 mA, whichever
occurs first
20 mA
10 mA
−40°C to +125°C
−65°C to +150°C
150°C
150°C/W
27°C/W
300°C
220°C
260(+0/−5)°C
20 sec to 40 sec
1 _{Overvoltages at EN, A0, A1, S, or D are clamped by internal diodes. Current}
should be limited to the maximum ratings given.
ADG636
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
Only one absolute maximum rating may be applied at any one
time.
ESD CAUTION
Rev. B | Page 9 of 16