PAC5250_17 Datasheet, PDF (7/70 Pages) Active-Semi, Inc – Power Application Controller

PAC5250
Power Application Controller
1. GENERAL DESCRIPTION
The PAC5250 belongs to Active-Semi's broad portfolio of full-featured Power Application Controller^TM (PAC) products that
are highly optimized for controlling and powering next generation smart energy appliances, devices, and equipment. These
application controllers integrate a 50MHz ARM^® Cortex^TM-M0 32-bit microcontroller core with Active-Semi's proprietary
and patent-pending Multi-Mode Power Manager^TM, Configurable Analog Front End^TM, and Application Specific Power
Drivers^TM to form the most compact microcontroller-based power and general purpose application systems ranging from
digital power supply to motor control. The PAC52xx microcontroller features up to 32kB of embedded FLASH and 8kB of
SRAM memory, a high-speed 10-bit 1µs analog-to-digital converter (ADC) with dual auto-sampling sequencers,
5V/3.3V I/Os, flexible clock sources, timers, a versatile 14-channel PWM engine, and several serial interfaces.
The Multi-Mode Power Manager (MMPM) provides “all-in-one” efficient power management solution for multiple types
of power sources. It features a configurable multi-mode switching supply controller capable of operating in buck, flyback,
or boost mode, and up to four linear regulated voltage supplies. The Application Specific Power Drivers (ASPD) are high-
voltage and ultra-high-voltage power drivers designed for each target set of control applications, including half bridge, H-
bridge, 3-phase, intelligent power module (IPM), and general purpose driving. The Configurable Analog Front End (CAFE)
comprises differential programmable gain amplifiers, single-ended programmable gain amplifiers, comparators, digital-to-
analog converters, and I/Os for programmable and inter-connectible signal sampling, feedback amplification, and sensor
monitoring of multiple analog input signals. Together, these modules and microcontroller enable a wide range of compact
applications with highly integrated power management, driving, feedback, and control for DC supply up to 52V and for line
AC supply.
Figure 1-1. Power Application Controller
SERIAL
INTERFACE
SPI, I²²C, UART
PWM ENGINE
16-bit timers,
HW dead-time control,
10ns resolution control
MULTI-MODE
POWER MANAGER
AC/DC, DC/DC,
linear regulators
50MHz ARM CORTEX-M0
MICROCONTROLLER CORE & MEMORY
1-cycle 32-bit multiplier,
24-bit RTC, 24-bit WDT, 24-bit SysTick, NVIC,
FLASH & SRAM
APPLICATION
SPECIFIC POWER
DRIVERS
ultra-high voltage high-
side gate drivers,
low-side gate drivers,
MV open-drain drivers
DATA ACQUISITION
& SEQUENCER
10-bit 1µs ADC,
dual auto-sampling
sequencer
CONFIGURABLE ANALOG FRONT END
3 differential PGAs,
4 single-ended PGAs,
10 Comparators,
2 DACs (10-bit & 8-bit),
Temperature monitor
The PAC5250 is available in a 57-pin 10x10 TQFN package. The PAC family includes a range of part numbers optimized
to work with different targeted primary applications.
-7-
Rev 1.7‒April 15, 2016