PAC5250_17 Datasheet, PDF (38/70 Pages) Active-Semi, Inc – Power Application Controller

PAC5250
Power Application Controller
12. APPLICATION SPECIFIC POWER DRIVERS (ASPD)
12.1. Features
 6 low-side and 3 ultra-high-voltage high-side gate drivers
 2 open-drain drivers
 Configurable delays and fast fault protection
12.2. Block Diagram
Figure 12-1. Application Specific Power Drivers
APPLICATION SPECIFIC POWER DRIVERS
HIGH-SIDE GATE DRIVERS
HS1
FAULT HS2
PROTECT _LS2
LS1
ENDRV
DELAY
LEVEL
SHIFT
PRE-
DRIVER
DELAY
LOW-SIDE GATE DRIVERS
V
P
PRE-
DRIVER
DXBx
DXHx
DXSx
ENHS2
DRLx
DOUTOMx
OM DRIVERS
OMx
12.3. Functional Description
The Application Specific Power Drivers (ASPD, Figure 12-1) module handles power driving for power control
applications. PAC5250 has six low-side gate drivers (DRLx), three ultra-high-voltage high-side gate drivers (DXHx), two
medium-voltage open-drain drivers (OMx). Each gate driver can drive an external MOSFET or IGBT switch in response to
high-speed control signals from the microcontroller ports, and a pair of high-side and low-side gate drivers can form a half-
bridge driver. The open-drain drivers provide activation control for relays, LEDs, buffers, and other loads.
Figure 12-2 below shows typical gate driver connections and Table 21 shows the ASPD resources available on PAC5250.
- 38 -
Rev 1.7‒April 15, 2016